Eufy Permanent Outdoor E120 Lights Bracket - With Screw Holes Parallel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More secure than the double sided tape, can attach to an extra piece of wood if your soffits are uneven with gaps.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 471
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DO A TEST PRINT BEFORE PRINTING A BUNCH
This was made because some soffits have part of the rafters sticking out below them which makes it difficult to property align the lights. A solution is to buy long thin pieces of wood (8ftx1-3/8x5/8 for ~$1 each) and attach the lights to the wood. Then attach the wood to the soffit/rafters. This version will allow you to attach the lights to said pieces of wood or to place the lights in thin/small areas, or channels.
Holes are 4mm wide and fit most standard wood screws such as #2
You may have issues with the thin walled corner lifting due to the thinness/height if you don't follow the suggested settings with PLA.
IMPORTANT!
Suggested Settings for PLA:
Bed Temp: 65C minimum
Brim: 2mm minimum outer brim needed w/ 0.1mm gap or less