Eufy Permanent Outdoor E120 Lights Bracket - With Screw Holes Parallel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More secure than the double sided tape, can attach to an extra piece of wood if your soffits are uneven with gaps.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 137
- Makes
- 1
- Views
- 471
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
DO A TEST PRINT BEFORE PRINTING A BUNCH
This was made because some soffits have part of the rafters sticking out below them which makes it difficult to property align the lights. A solution is to buy long thin pieces of wood (8ftx1-3/8x5/8 for ~$1 each) and attach the lights to the wood. Then attach the wood to the soffit/rafters. This version will allow you to attach the lights to said pieces of wood or to place the lights in thin/small areas, or channels.
Holes are 4mm wide and fit most standard wood screws such as #2
You may have issues with the thin walled corner lifting due to the thinness/height if you don't follow the suggested settings with PLA.
IMPORTANT!
Suggested Settings for PLA:
Bed Temp: 65C minimum
Brim: 2mm minimum outer brim needed w/ 0.1mm gap or less