1 / 7
Raspberry Pi Zero camera case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case that fits perfectly for a Pi Zero and a Pi Camera board.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 476
- Wydruki
- 2
- Wyświetlenia
- 3300
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (112)Powiązane
A case that fits perfectly for a Pi Zero and a Pi Camera board.
It has also optional holders for tripod and GoPro mounting plates.
Top and bottom halfs are hold firmly together with four M2 screws and nuts.
Print instructions
Printed in PETG with 0.4 mm nozzle and 0.2 mm layer height