Bicycle Handlebar holder for LedLenser T7 torch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print, M4 screws can be taped straight in to the print
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my take of a bicycle holder for the popular LedLenser T7 torch. I use it for my comuting bicycle and felt that I might share it. It is customized for a 32mm hanlebar and has no adjustable clamp so you need to shim it in place to get a suitable friction to hold it in place and still be adjustable.
To be able to assemble you will need 2 ea M4x30 and a Countersunk M5x12 + a M5 nut You will also need a round file to be able to trim the nut and screw a bit. Design is not perfect but it works for me. I printed my sample in ABS @ 60% infill.