1 / 5
Bicycle Handlebar holder for LedLenser T7 torch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print, M4 screws can be taped straight in to the print
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is my take of a bicycle holder for the popular LedLenser T7 torch. I use it for my comuting bicycle and felt that I might share it. It is customized for a 32mm hanlebar and has no adjustable clamp so you need to shim it in place to get a suitable friction to hold it in place and still be adjustable.
To be able to assemble you will need 2 ea M4x30 and a Countersunk M5x12 + a M5 nut You will also need a round file to be able to trim the nut and screw a bit. Design is not perfect but it works for me. I printed my sample in ABS @ 60% infill.