Drone Propeller Cut Tool for Dremel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to cut old props to the specific length
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this to cut old props to the specific length i wanted. I use a old damaged 1104 motor i had as a rotation axis for the prop. I'm using a 1mm end mill - Link
Each hole for the motor Block has the number prop length in inches. On my pictures you can't see it well because i forgot to configure the supports when i made the Gcode. ;)
I have two versions for the motor block (rotation axis for the prop). Threaded version - to print in ABS and use a M3 tap. Insert version - to print in PLA, heat a M3 insert in the tip of a long screw and gently push it throught the hole. Works like a charm!
Beware of the end mill when using this tool.
I used PLA for the main part.
ABS for motor block Threaded version
PLA for motor block insert version