Drone Propeller Cut Tool for Dremel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to cut old props to the specific length
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this to cut old props to the specific length i wanted. I use a old damaged 1104 motor i had as a rotation axis for the prop. I'm using a 1mm end mill - Link
Each hole for the motor Block has the number prop length in inches. On my pictures you can't see it well because i forgot to configure the supports when i made the Gcode. ;)
I have two versions for the motor block (rotation axis for the prop). Threaded version - to print in ABS and use a M3 tap. Insert version - to print in PLA, heat a M3 insert in the tip of a long screw and gently push it throught the hole. Works like a charm!
Beware of the end mill when using this tool.
I used PLA for the main part.
ABS for motor block Threaded version
PLA for motor block insert version