Passthrough Tic Tac Toe (With a TWIST)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Is a great vortex mode! A must need board/travel game to bring! Also a good torture test for your printer! 👍
- Ocena
- 5 / 5
- Polubienia
- 472
- Pobrania
- 942
- Wydruki
- 5
- Wyświetlenia
- 5696
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
What makes it special
I built this one around a simple change to tic-tac-toe: you slide each piece all the way down the board, like Connect 4, instead of placing it anywhere. That one change makes a familiar game play very differently, and it is fun to print, play, and tweak.
This is the 0.5 (Beta) version. The insides are complex, so the print can take a bit longer than a plain board game. It is a hard print, so apply the settings below carefully. I printed it multiple times to check that it works.
I got the idea from Evet17 on Makerworld, because of his Connect 4 version. I made my own version in Fusion 360. For the record, this is my model, but the idea came from Evet17.
Fit tip
In PrusaSlicer, go to Print Settings, then Advanced, and set XY Size Compensation to -0.35 for the inner piece and -0.2 for the board/outer piece. Avoid stringing on the inner pieces if you can. I highly recommend sequential printing for them, so you do not have to keep coming back every 10 minutes. I also uploaded the.3MF file, so you can have the settings already applied.
Print settings
Infill: 30% to 50%
Infill Type: Gyroid
Supports: NO
Brim: NOT Recommended
Filament: PLA or PETG
XY Compensation: -0.35 for the inner piece and -0.2 for the board/outer piece.
Good to know
Print 5 pieces. I do not recommend printing all five at once, because there will be a lot of stringing. If you have adhesion issues, try a bed sheet with more friction. I would not recommend a brim unless you are able to get all of it off.
My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.
You may also like
The BEST Impossible Vortex Passthrough