1 / 4
Poor man's gridfinity drawer slim (save filament) v4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light version of Chipp's drawer from Gridfinity modular drawer system
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 271
- Wydruki
- 1
- Wyświetlenia
- 1351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (112)Powiązane
rev. 4:
- improved .FCstd file
- now wall pockets are parametric!
rev. 3:
- removed some pockets from the backplate for more strength
rev. 2:
- made thicker grid as very thin walls between pattern is somewhat difficult to print, I suspect filament overheating in the nozzle (maybe lowering temperature could fix this)
- backwall is now somewhat parametric, you can change spacing and number of iterations of the pocket pattern (will do the same for sidewalls in near future
This is poor man's drawer for Chipp's Gridfinity modular drawer system:
- all mesh structure walls but the front one
- pockets under bins
- around 36% less filament compared to original
- around 5% more print time compared to original on MK4S
- test your printer with this very fine walls model
I went down to 51g of PLA compared to 80g original drawer design with 0.2mm layer height, 1 perimeter, 5% 3D honeycomb infill, 3 top and 2 bottom shells.
It slides.
I have attached a FreeCAD-1.0beta .fcstd file if you like to tinker with my stuff.