8-Bit Pokémon Trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What if you could have the classic 2D Pokémon Trainer... but in 3D... well now you can!!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created this in 2018 and forgot about it as I had no way of efficiently printing it. Now that I have the Prusa Mk4 and the MMU3 I have finally printed it.
Printing Instructions:
Supports required everywhere: Probably an orientation that will be better than upright but I didn’t want one side smooth with the others having comparatively noticeable layer lines.
Requires 4 colours: Black, Red, White, and Blue.
It can be scaled to any size required, at any resolution, my settings were:
- 50mm tall (z height)
- 0.2mm layer height
- 10% Grid infill
- 0.4mm nozzle
This is published under a NON COMMERCIAL license, so please do not sell the design or prints made with this design (I don’t want Nintendo to hunt me down).