Liczymy pasujące modele…
The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones
Reccomend printing with organic supports at 0.2 layer height with 0.4 nozzle. If you want the same fuzzy skin texture for the grip and the logo on the back like in the picture then try using the .3mf file below, though bare in mind this…
This is a case I made for the 8Bitdo Zero controller by 8Bitdo. This is a small controller, so I want to carry it with me everywhere I go to play some games on my smartphone, but I don't trust myself to carry it in my bag with nothing to…
Hey! I wanted a minimal and "invisible" stand to showcase my 8BitDo controller. So, I designed these little things. They're small but surprisingly stable. It fits into the screw holes on the bottom of the controller. Hope you enjoy it! Max
Nozzle 0.2mm Layer Height 1.2mm
Replacement buttons for the 8BitDo SN30 Pro controller. These buttons have a more pronounced fillet to allow for easy sliding from button to button.
These where made using a a single exturder and swapping the filament at different layer heights. First layer prints 2 mm high for a solid base. Then .5 mm high for the following colors. The models are designed to print in a certain order.…
Simple Wall Mounted 8bitdo Ultimate C bracket to be used with command strips. Command strip part number : 17204-E…
Inspired by https://www.thingiverse.com/thing:7061089 and https://www.printables.com/model/1230129-8bitdo-micro-controller-cover I wanted to combine and perfect these two designs, and here is the result: a case for your 8bitdo Micro that…
This model is a replacement part for the 8BitDo SN30Pro controller. Some structures were reinforced and the hole for fitting the axis was slightly enlarged for better compatibility in relation to the original part and other replica models…
Holder for Oneplus 7 Pro on the 8Bitdo NES30 bluetooth controller. There are 2 STL files in this one for phone with case and one for no case on the phone. Case used here (OPPRO OnePlus 7 Pro Case Pro Rugged Shield)
The under-desk hanger for my 8bitdo Ultimate 2C controller (likely fitting others too), for Multiconnect connectors with openGrid spacing (28mm). Bottom curve from this stand . Multiconnect slot from the modeling files . Dongle slot from…
Print the holder, chin, and back part separately. In my case, I use PLA+ with 0.2 nozzle head and 3 inline walls. For padding between the taco and the screen, I recommend to use foam tape. Here I use dark green foam tape with 1.1 mm…
Popis /////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build…
A retro squirtle in all its voxelized glory. If you are going to change the scale, pay close attention to the slicer, due to the model itself there is an empty layer sometimes for some strange reason, so make sure all the layers are…
Print in this orientation with supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
Just learning tinkercad. This helped get a feel for it. Print all at once or one color at a time.
Dos versiones de soporte para el Skadis de IKEA del mando 8BitDo Ultimate 2C. Two mount versions for the IKEA Skadis.
A clamshell-style protective case for the 8BitDo N30 Pro controller . The cover features a print-in-place hinge and snap-fit magnetic closure using standard round neodymium magnets. Designed in OpenSCAD using the BOSL2 library to protect…
Printed with 3 walls - 15% infill in PETG.
I changed the handle to get a better grip and a keychain in both sides I changed the clip to be more resistence and str
Replacement for the 'clip part' of the 8bitdo smartphone clip that attaches to a Black Shark Cooler 5 Pro. Enable supports, I suggest printing in the orientation the .stl file is saved in to improve "structural integrity".
I have use PLA, 100% infill. You will need a magsafe ring compatible. The Diameter compatible for the ring is 56.35mm I'm leaving a assamble instruction video. https://youtube.com/shorts/uXcoJva9b94?feature=share This is the ring I'm…
Purchase: Also available at kytor.com/store Recommended Materials: DURAMIC 3D PLA Plus Gray or Black Printing: 0.4mm nozzle, 0.2mm height, 15%+ infill, 2+ walls No brim or supports necessary Variants: -00 Single Controller Stand Revision…
Holder for game controller. Printed with PLA without supports. Printed upright. Mount with double sided tape.
A stand for the controller using the design of the USB dongle as inspiration.
This is a simple mount for the 8bitdo n30 pro for an IKEA Skadis wall organizer
Printed on: Creality ender 3 V3 KE. Filament: PLA Layer height: 0.08 mm
Just the mobile controller clip for the 8bitdo Pro series of controllers . It can be modified to add various clips to the top including as an example i added magsafe by combining it with a magsafe stand. There are step files in the…
Includes alternate with Analogue logo Originally remixed when source file was Public Domain
After a short flight, the right shoulder button from my sons Ultimate C controller went missing, so I made a new one in Onshape. Printed on a Core One with 0.4mm nozzle at 0.1mm layer height. Works fine!
I had an old 8bitdo phone mount for Xbox one controllers lying around and wanted to use it with my Dualsense, so I made this remix to serve as an adapter for it. This is only the part that attaches to the controller and does not include…
if you're using bambulab printers it is highly recommended to use the supertack build plate-(or something similar if you're not) the magnets should just press in and should also stay in the buttons most of the time when removing them from…
A retro squirtle in all its voxelized glory. If you are going to change the scale, pay close attention to the slicer, due to the model itself there is an empty layer sometimes for some strange reason, so make sure all the layers are…
Print the holder, chin, and back part separately. In my case, I use PLA+ with 0.2 nozzle head and 3 inline walls. For padding between the taco and the screen, I recommend to use foam tape. Here I use dark green foam tape with 1.1 mm…
This is a phone mount for my 8bitdo Pro 2 that snaps directly to the tabs on the controller meant for the official mount. And this is NOT my own creation all these models are from different creators I just put them together.
This is a holder designed for use for the 8bitdo ultimate series of controllers. It is a remix of this model: https://www.thingiverse.com/thing:5926164 which is a remix of this model: https://www.thingiverse.com/thing:5807524
Just a remix of the model by TaisT so it can be mounted underneath a desk. Make sure you use strong double sided tape or glue. Since the controller can be a bit heavy for the tape.
This is a hollowed-out version of the 8BitDo SN30 Pro thumbstick "cap" originally made by facelesstech. The intention of it is to replace a broken or missing rubber cap on the thumbstick for that or any other compatible controller. I…
Proudly display your 8Bitdo PCE 2.4G Wireless Gamepad for PC Engine Mini, PC Engine CoreGrafx Mini, TurboGrafx-16 Mini & Nintendo Switch controller with this display stand. A single and double display are both available. Purchase: Also…
Reccomend printing with organic supports at 0.2 layer height with 0.4 nozzle. If you want the same fuzzy skin texture for the grip and the logo on the back like in the picture then try using the .3mf file below, though bare in mind this…
8bit Pacman is back… as a fidget toy! Quick and easy to print, its compact size makes it perfect for on-the-go entertainment, while the magnetic design adds an element of tactile pleasure, enhancing the fidgeting experience. The magnets…
8bit Pacman Ghosts are back… as fidget toys! Quick and easy to print, their compact size makes them perfect for on-the-go entertainment, while the magnetic design adds an element of tactile pleasure, enhancing the fidgeting experience.…
8bit Pacman Vulnerable Ghost (Blue Ghost) is back… as a fidget toy! Quick and easy to print, its compact size makes it perfect for on-the-go entertainment, while the magnetic design adds an element of tactile pleasure, enhancing the…
8bitdo pro 2 joypad stand for shelf - PETG or PC recommended Support manette 8bitdo pro 2 pour étagère - PETG ou PC recommendé October 10 - V2 - Usable horizontally and vertically
A wall mount holder for Ultimate 2C No supports needed!
Remix of Jbot's 8bitdo Ultimate wall mount. Just added Skadis mounts.
Remix of the phone mount holder by grumpygopher: https://www.thingiverse.com/thing:6622697 This design is created to use the 8BitDo Micro controller as a multimedia controller for your car. I've also included a hole for the wrist lanyard.…
Small case for a controller (in my case a special building) from the 8Bitdo brand. I think it is quite universal and also has a hole for the adapter. In any case, I leave the files in the description in case you want to adapt them to your…
You can mount the Nintendo Switch on your 8Bitdo Controller. You need the lower Part of the 8bitdo Xtander.
Bob-omb 8bit -- Christmas ornament :) Print Settings Printer Brand: RepRap Printer: Hephestos2 Rafts: No Supports: No Resolution: 100 micron Infill: 100% Notes: The hole is 3mm in diameter Category: Gadgets
Mario mushroom 8bit -- Christmas ornament :) Print Settings Printer Brand: RepRap Printer: Hephestos2 Rafts: No Supports: No Resolution: 100 micron Infill: 100% Notes: The hole is 3mm in diameter Category: Gadgets
Stand supports both: 8Bitdo Ultimate 2C and XBOX Series Controller
Remix of the 8BitDo Ultimate IKEA Skadis Holder (DraftB) by JackSoldano on Thingiverse, https://www.thingiverse.com/thing:5926164, to fit the 8BitDo Ultimate 2C wireless controller. v2 now includes a cut out for the charging port and a…
Use this pipe sleeve and cable router in combination with all other plant pieces (tongue, teeth, pringles pipe topper, spots, and original gums) here: https://www.printables.com/model/502103-piranha-plant-piggy-bank-lid to create a Mario…
Note: I forgot to put on rubber feet on before taking these pictures. This is a cradle to hold the 8BitDo keypad at the proper typing height when using with a C64X. There is hole in the back for the USB-C charging cable which I just leave…
Parts Required INIU WI213 Magsafe Charger 8BitDo Mobile Gaming Clip for Pro 2 8bitdo Pro 2 Controller Rant I know it's super niche, but that's what 3D printing is for right? Took me 7 attempts to get the fit right for the Magsafe Charger…
Parts Required Magsafe Ring (Generic, you can find for cheap on EBay, Aliexpress, Temu…) 8BitDo Mobile Gaming Clip for Pro 2 8bitdo Pro 2 Controller You will need super glue to keep the phone in place for when the phone warms up.
I'm using the 8BitDo Lite 2 as a travel controller to play on the iPad on the train and was looking for a minimalistic cover that would just prevent the keys from being pressed when in the bag. It weights ~30gr and makes the controller…
If you need to raise the contact point on your 8BitDo Ultimate 2C thumbstick (or any similar controller with a 17 mm thumbstick diameter), you can print a custom TPU part to enhance grip and smoothness. To ensure success: Material Prep:…
This is a remix of the regular wall mount with a place to store the usb dongle
Print in this orientation with supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
Reupload of a stand for the SN30 Pro+ since I couldn't find one that seems to fit on here!
Just learning tinkercad. This helped get a feel for it. Print all at once or one color at a time.
Just learning tinkercad. This helped get a feel for it. Print all at once or one color at a time.
Hello! I recently bought 4 of 8bitdo's Ultimate 2C controllers for Steam Deck party games, and wanted a way to store them safely when transporting. So I remixed Whity's rugged box to do so! (May fit other 8bitdo receivers. These are my…
Print in this orientation with supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
Print supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
This low-profile case offers a seamless blend of practicality and elegance, inspired by the refined aesthetics of premium product packaging. A 3d scan of the NES30 Pro ensures perfect contouring of the case design for snug, yet easy to…
Remixed the 4 controller stand to include a cable organizer.
Ever wanted to plug your lite 2 controllers in and have them sit nicely together and not take up too much space or look like they belong. This is my answer for that problem. This dock allows you to plug two lite 2 controllers in…
Feed the Goblin: https://buymeacoffee.com/goblygon 2 types of stands for the 8bitdo Ultimate C Contollers: Original: Same shape as the charger stands that come with the more expensive models Large Base: Flatter at the front bottom. I made…
Dos versiones de soporte para el Skadis de IKEA del mando 8BitDo Ultimate 2C. Two mount versions for the IKEA Skadis.
I saw the 8bitDo Mobile Clip and my first thought was that just like some meetings should be emails, some products should be STLs. Then, as tends to happen, the product of a couple days of fiddling only turned out marginally better than…
This is a minimalistic stand for the 8BitDo SN30 pro game controller. Print base part. If you want colored infill, print the “hex infill” file 4 times. Perhaps use a drop of glue to secure it, if neccessary To avoid gliding on the table,…
Joypad extension for improved precision (e.g. for aiming). The individual parts have cavities for magnets (circular 8mm diameter, 2mm thickness). joypad_magnet_top and joypad_left are meant to be glued together as well as joypad and…
Can be printed on the side or upright. Supports required for the hooks.
Here is a remix of the "8BitDo Ultimate Phone Mount with Modular Mounting System" from akmiller01 where I've modified the design to mount to the Ikea Skadis in a similar way to the "Xbox Series S/X Controller IKEA Skadis Holder" from…
Requires 5 M3x12 machine screw. Also included the solidworks files if somebody want to modify it.
A desk decoration of the Dragon from Adventure. Layer height: 0.15mm Infill 20% Perimeters: 3 Custom Supports (Area around dragon neck is thin, remove supports carefully!)
Inspired by the 8BitDo Ultimate controller mounting clip, this clip is designed to add clearance to the front buttons...
It's a slightly rounder version of DusBus's controller stand. I also added a slightly raised area to the base so it kind of appears to be floating on the table. Prints really easily, no need for supports. I printed mine with 100% infill…
A simple holder for the 8bitdo Ultimate C controller. Might work with other controllers as well.
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
I added storage for a Bluetooth dongle and the USB charging cord that comes with the 8bitdo wireless controller kit for the Gamecube. The 8bitdo dongle and the BlueRetro dongle from AliExpress both fit
This remix adds a place to store a 2.4GHz dongle together with the controller. Insert the dongle into the hole behind the controller. Supports needed only for Skadis mounting part, the hole can be printed as bridge.
This is the next iteration of my attempt to make the best universal phone holder for controllers. Inspired by newer Hall-effect controllers like the 8BitDo Ultimate 2, I wanted to make a design to fit that, and ensure that it is easier to…
Remix - Printed on Bambu Lab A1, 0.6 nozzle with minimal infill with PLA. I wanted the top part to have a textured look, so I printed upside down on a textured plate with support. If printed normally, no support will be needed.
Hang your 8BitDo Ultimate 2C controller by its joysticks under your desk with either screws or double sided tape.
Uses two pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg/files Print on its side to get the best strength. 0.2 layers in PLA or PETG and 4 perimeters. Automatic paint support and a wide brim. I…
A wall-mounted holder for the 8BitDo Pro 2 Controller, Pro+ and SF30 Pro. Attach with 2 sided tape
Attaches to joysticks to store the dongle when you travel with the controller. Provides some level of protection for the joysticks as a bonus. Yes the stand has a slot for the dongle, but are you really using it? Updates 2025-11-30 made…
This is a simple attachment for the 8BitDo Mobile Gaming Clip . It replaces the clam that holds onto your phone with a Magsafe magnet, which allows you to use the phone vertically (which is great for DS emulation) and horizontally, and is…
Remix d'un grip pour manette 8bitdo SN30 Pro pour y ajouter un support pour téléphone (8cm). L'un se clipse (et se déclipse) dans l'autre, pour ne prendre que peu de place dans un sac à dos par exemple. imprimé en PLA. Hauteur de couche…
Rather simple this one. A replacement button for the 8BitDo Lite SE. Will most likely fit other 8BitDo controllers that use the same button type. I lost the plus button while repairing my Lite SE so this is a nice little replacement until…
I carry this controller around with me and I kept on inadvertently turning it on if I had it in my pocket. I needed to cover the lower center 8bitdo button that is the power button. I wanted to keep the case as minimal as possible for…
![8bitdo thumbstick extension TPU [2 versions] STEP](https://media.printables.com/media/prints/1104250/images/8345672_fb4e62a2-4d74-452a-a73c-44d03caa468b_24cc618e-a721-47a2-a594-7fe8d4fba634/photo_2024-12-10_07-06-23.jpg)
