Collapsing Magsafe Phone Mount for 8BitDo SN30 Pro Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suspends an iPhone slightly above ones hands for gaming, and detaches from the controller to form a basic phone stand.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a way to play PSP and DS games on a plane, so I made one.
Printing Details:
The uploaded files are in the correct orientation. Add supports as you see fit
I am testing with 100% infill PLA, will update this rec if I have issues with it
Magsafe Ring and Magsafe Case Compatabilities:
I'm using this magsafe ring (amazon link) but this is pretty much a fancy piece of steel with adhesive. When I tried using this steel ring with a caseless iPhone, it didn't hold on tightly due to a combination of weak magnetic strength and low friction between the glass back of the phone and the smooth surface of the ring.
Turns out I unknowingly bought a phone case with magnets in it, so between the extra magnets in the case and the friction between the case and the steel ring, the connection felt pretty secure.
You can buy magsafe rings with actual magnets in them (amazon link) but I haven't tested with them yet. I'd imagine its thicker, so maybe some modifications to the magsafe plate component would be necessary?
Parts List:
1x Magsafe Ring
If using this caseless, get a ring with actual magnets in it
If using this with case, get a case with magnets in it and you can get away with a steel ring, though I don't think the rings with magnets in them cost that much more
2x M3 Screws, Length can be like 10m to 16mm, maybe 18mm would work too. Or mismatch them, its not that serious
Assembly:
Handheld Mode:
Spread the sticks apart from each other and remove the magsafe plate
Unfold the hinged piece
Slide the hinged piece into the slot on the magplate. The phone should be obstructing your view of the controller when put into place. Consult the images in the post for reference
Kickstand Mode:
Put the pieces into Handheld Mode
Flip the magsafe plate 180 degrees
Pop the entire assembly off of the controller. I find digging my thumb into the clamp near the sticks is the easiest.
Rotate the hinge all the way back and attach the phone.