Hinge, Low Profile via TPU Flex, 8mm Grid Compatible with 4mm Screw Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hinge in multiple lengths . Requires printing in TPU or other durable flexible material. Prints easily though.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Here is a hinge similar in purpose and use cases to this one from GoBilda: https://www.gobilda.com/2902-series-hinge-5-hole-38mm-length/
This requires a highly flexible filament type such as TPU. The hinge mechanism is simply a thinner section of TPU that bends very well relative to its strength.
PROS (In comparison to metal hinges):
- Much cheaper if you already print in TPU.
- Much quicker to acquire if set up and you don't already have a hinge.
- Various lengths easily acquired.
- Can be better quality than the cheap ones.
- Lower profile than the good ones.
CONS:
- Not as rigid along the pin axis. More play in 3 dimensions, and twisting.
- Probably wears out more quickly
- Weaker, though way sufficient for many/most use cases.
ALSO:
- Higher resistance to movement.
- Slightly springy, toward the unbent position.
SUPPORTING YOUR FAVORITE DESIGNERS:
The Amazon links below are affiliate links, and it costs you nothing to use them. If you use an affiliate link to get to Amazon the next time you need to buy something, the designer associated with that link will get a small percentage of any sale made during that browsing session.
So, if two different people spend $100 on something they were going to buy anyway, I get a “thank you” vanilla latte for posting these things. If my designs aren't your favorites, please do this for someone else who is. Thanks.
BOM:
- Filament: https://amzn.to/40mOVie
INSTRUCTIONS:
- Use a good “structural” part profile. Basically this means, 3 or more walls, 4 or more top and bottom layers, and 20% or more infill. These are thin enough that there is very little infill, but it could be important, binding the top and bottom layers together.
- If you haven't printed TPU, read or watch a video on TPU printing tips. TPU is very different from more common filaments like PLA and ABS.
- ‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.