120mm Newtonian Telescope Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My refractor telescope's mount broke on the hinge, so I designed a new one. I have not incorporated any threads on the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
My refractor telescope's mount broke on the hinge, so I designed a new one. I have not incorporated any threads on the holes as I will be using either self tapping screws or nuts and bolts.
I may, update this in the future and add the other half that did not break.
P.S My print has a line through the top. I ran out of filament through the print and had to do a replen, losing about 2 layers in the process. At that point it would still work anyway, but I wanted it to look right.
Print Settings
Printer:
RepRap Samuel
Rafts:
Yes
Yes
Resolution:
0.2
100%
Notes:
I suggest using ABS, however I did print in PLA.
Category: Sport & Outdoors