HSTNS-PD14 cover with XT60E and banana connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover with cutouts for banana connectors, a voltmeter and an XT60E-F connector for a modified HSTNS-PD14 Power supply.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cover for a modified (voltage upped to 13.5 V) HP server power supply for use as a ham-radio psu. It should fit other similar HP models (Dimensions H38.5mm x W86.5mm). The support part is being used to keep the psu level.
There is a ventilated and an unventilated version of the psu cover. There also is a version for another kind of switch, because I only had one of the rectangular switches on hand.
I used these connectors:
Banana Connectors:
Voltmeter:
(the voltmeter isn't very accurate, the power supply has an output of 13.5 V, the voltmeter displays 13.4)
XT60E-F:
Switch:
Round switch: