Corner Camera Mount for bear / 2020 / 2040 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner Camera Mount for bear / 2020 / 2040 - uses 2x M5x10mm bolts and 2x T-nuts to attach to extrusion.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
****************
If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀
If you print 🖨 it post a picture 📷 / MAKE! 😄 Let me know how it works for you.❔ 🙂
Don't forget you earn Prusameters🧵 when you post a MAKE!
****************
I built this little camera mount for my MK3 Bear scratch build. I will be using it to hold my Pi Zero W 2 for octoprint (I am using this enclosure by @TD1_510830 to hold the pi: https://www.printables.com/model/753906-raspberry-pi-zero-2-w-with-camera-module-v-3-case/ ).
The mount bolts onto the frame with 2x M5x10mm bolts and 2x T-nuts. Camera can by attached with the normal 1/4" bolt / knurled nut. I happened to be lazy and threw in a T-nut and third M5x10mm and it worked OK.
Print settings
I printed on my Prusa Mini with PLA, 0.2mm layers, organic supports on plate, and 15% gyroid infill.