Opening Poke ball with a latch and print in place hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An opening pokeball with a latch to hold it closed and a print in place hinge.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 1298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
My son wanted an opening Poke ball to go with his Pokémon trainer Halloween costume so I made an opening Poke ball with a print in place hinge. The ball has a latch that can be assembled that will hold the ball closed. You will need a spring from a pen. I have put cutouts for 5mm x 2mm magnets in the black center piece. These magnets can be used to hold the ball closed or if you set the magnets in so that they repel each other, it will make the ball spring open more easily. The back of the latch will need to be glued on with a strong glue due to the constant pressure of the pen spring.
Print Instructions:
-Print at 0.20 mm layer height with a 0.4 mm nozzle
-Print with 2 or 3 walls
-15% infill
-PLA
-Everything should be printed in the orientation that it is in.
-The latch pieces will need supports. I used simple tree supports.
-The outer shell piece can be printed without supports if your printer is well tuned, but I recommend supports in the middle of the hemisphere for most printers.
Please let me know if you have any problems with the files.
Please do not sell prints of my models.
Thank you for understanding and I hope you enjoy the print.