Liczymy pasujące modele…
Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…
Prevents my garage door from running into the enclosure door. Reuse the original stopper/magnet assembly. Add one M4 fastener per side. Printed in PLA.
All credit goes to @755123BE for the original design. Just like the original, these covers are designed to be used with “ AeroGarden Seed Pod->Shrouded ”. The original works great and are still my go to when starting out, but as my plants…
Use something different to hold your ring, this box opens in a unique way. The box itself is print in place, I used 0.4mm nozzle with 0.2mm layer height and fairly standard settings. The ones shown in the pictures are Bambu Lab PLA Matt,…
Three pieces to this tea light candle holder that can be printed separately with different colors. The legs will need to be glued into the base, but the cover sits over the base and can be taken off and on to light the candle. You should…
it is for nuki 2.0 and 3.0 created with help of @LAtelierdeFlorent
This print fits if you remove the screws beneath that are holding the down spout to the gutter. Then the filter can be added and the screws can be screwed back in place and into the model to help hold it in place. I would recommend PETG…
Universal wooden roof window extension rod for opening. My window has 40mm wide frame where I can attach this rod. Source file (FreeCAD) available for possible modifications. Motivation I have roof window (not Velux) which is inaccessible…
Disclaimer: If you print this a fdm 3D printer (which you probably will) it might not be so accurate, especially for the smaller semi circles. Also, I don't recommend printing this with a material that has a lot of thermal expansion (such…
Tato rozevírací forma na vosí hnízda (šišky) je vylepšená verze mého původního autorského modelu , který vznikl před několika lety kdy jsem dostal nápad jak udělat vánočnější "vosí hnízdo"a šiška mi přišla ideální dekorace i tvarově…
A custom replacement debris‑trap basket for Gaiger roof water collectors. Fits an 80 mm opening with 50 mm depth.
This is a tiny 3D-printed add-on for the NexTool Mini Flagship F12 . The stock blade uses a thumb hole , but on this knife it’s honestly not great for one-handed opening. With this part installed, the hole basically turns into a thumb…
This Love Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Sword/Shield. It’s part of an ongoing series of Poké Balls adapted from…
Tool for unscrewing the back cover of a wristwatch case. For replacing the battery. The exact dimensions are shown in th
I solved a simple and quick connection, the Creality falcon 2 pro laser ventilation outlet into an eye equipped with a 4mm polycarbonate insert. I designed a flange with a quick hose connection (inner diameter 73mm) and a simple eccentric…
Simple part to repair water kettle lid button
Print Settings This model was printed on a Prusa CORE One using the following settings: 0.4 mm nozzle 0.20 mm layer height PETG filament 3 perimeters 30% gyroid infill 33 minutes print time 9 g material No supports required. Standard…
My wife had a hard time opening this style of humidifier so I created this tool to provide more torque.
Top tank with opening for launch lug for Outlander model rocket. 1:1 scale with Estes Outlander. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: Hobby
Landing gear box cover for Outlander model rocket. 1:1 scale with Estes Outlander. This version has an extended opening, for additional landing gear clearance. A version with the standard opening is also available. I printed these on…
I had a leftover 30mm cooling fan so I decided to remix the Raspberry Pi Zero cover to add a mount for the fan to keep both boards cool in an enclosure. It also has an opening to access the RPi's GPIO header. It is made to attach the fan…
I needed an extra‑tiny plant pot for growing small plants inside little jars—but nothing on Printables was quite small enough. Scaling existing models down only made the walls too thin, so I designed a purpose‑built solution. These mini…
Very minor remix of original model. I just cut open input and output terminal so the wires can be installed before screwing this housing in making the installation easier. I also opened additional holes to see indicator LED lights and…
A unique 3D printable creation — this Medieval Wooden Dungeon Door With Stone Frame, Hinged Opening, Fits 1 Inch Grid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Medieval Wooden Dungeon Door With Stone Frame, Hinged Opening, Fits 1 Inch Grid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
I wanted to be able to remove my projects from the feeder slots without cutting the yarn, while still having the nice control of keeping the yarn separated while working. Other than the noted differences, everything was printed as is from…
This is a stackable box I created to hold loose tea bags, but can be used for a variety of items. The boxes will stack on top of each other, nesting inside each other as they stack. The file also comes with a printable top as well. They…
Support usable with plants that already have branches that would otherwise block.
My vent knobs got brittle and broke, so I designed these to replace them. I made the longer one for my wife, so it is easier for her to reach. Both will fit over a standard 12 splined stud. 6/6/26 - Changed diameter of standard knob…
Cedulky, které informují, jakým směrem otevírat dveře. Signs indicating which way to open the door.
I added an opening on the side for the EXT_5V wiring to come out. Is it on the "wrong" side because I'm dumb or because that's where i needed it? The world may never know (it's because I'm dumb). It works for me, so I'm not inclined to…
I put this on a box for a DIY BedJet Video here:
Motivation [ water kefir production ] Water Kefir is a drink made from water, sugar, lemons and dried figs. With the help of "water kefir crystals" (living organism), a prepared mix of ingrediants turns into a drink (similar to lemonade)…
DE Beschreibung: Passend für das Eheim Aquarium-Set Aquastar 54l. Ein Schnellöffnung Deckel um nicht den ganzen Deckel des Aquariums öffnen zu müssen. EN Description: compatible for the Eheim Aquastar 54l aquarium set. A quick-release lid…
The RTL-SDR Blog V series is a decent little receiver, but as a dongle it hangs delicately off of a PC's USB port and is easily broken, especially when used portable with a laptop. This case securely encloses and supports the dongle and…
Introducing the Parametric Watch Opening Tool. This model builds upon another tool, but it introduces serveral parametric dimensions, allowing the user to ajust the tool to it's watch. The parametric dimensions are the outer diameter, the…
Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…
I have printed it in PETG from 3dJake, at PIF-settings. Works fine.
3D Hydroponic Tower with 4 Openings Overview The 3D hydroponic tower is a versatile and space-efficient solution for growing plants in a controlled environment. Designed with four openings, it allows for easy access to the plants while…
An internal design to adapt the exhaust hose from a larger standalone AC unit to a small window opening. There is a full adapter for those with larger printing volume and a left and right set that can be printed in a smaller print volume…
UPDATE 16/8/2024 Somehow I uploaded bad spring design but now it should be okay. If it does not work try pulling the spring out a bit or cut it a little shorter. In case of any problems do not hesitate to reach me in the comments. (I was…
This is an automatically-opening Gengar Ball, based on the GengarBall design by WizPrint3D (link below), and adapted from the Poke Ball Customizable Base (listed as the remix for this ball). It was created as a part of #ProjectKurt , a…
The main reason is to be able to ventilate the house and be sure that our cat does not come home with a mouse ;)
I downloaded the Arduino Nano holder from Alpo Hassinen https://www.thingiverse.com/thing:2635159 and then could not mount it to my power supply front panel the way I wanted. I wanted to be able to reprogram the Arduino Nano without…
This Great Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (link down below), based off of the in-game model from Pokemon Let’s Go Pikachu and Eevee. It’s part of an ongoing series of Poké Balls adapted…
Closed Tremolo Cover for the Jackson Dinky. Used on my JS32 with Floyd Rose. Attach with M3 screws.
This Cherish Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Let’s Go Pikachu and Eevee. It’s part of an ongoing series of Poké…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
This Heavy Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Heavy. It’s part of an ongoing series of Poké Balls adapted from the main…
Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…
needed a simpel spray can holder for wallmounting with drywall screws
This Master Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Let's Go. It’s part of an ongoing series of Poké Balls adapted from the…
This puzzle of opening the lock with a key is not so difficult, even children can handle it. You need to push the key through the ring until the very end. No need to use force. If the key cannot be turned, go back a few teeth and try a…
We use in our Company some LTE-USB Sticks. But the User can easily open the Stick and remove the SIM-Card. An other problem is that the original Cover will get lost over the time. I've designed a Cover that cannot opend by hand but with a…
This is the Eye Ball! A custom design I made as part of Project Kurt. It opens if you press the center button! Check the PDF for written assembly instructions with pictures. The 3mf was made using the .step file for the project, so it has…
My son wanted an opening Poke ball to go with his Pokémon trainer Halloween costume so I made an opening Poke ball with a print in place hinge. The ball has a latch that can be assembled that will hold the ball closed. You will need a…
Introducing the Box Buster! The simple yet effective keychain that opens boxes on the go. This model simply attaches to any keyring and can open almost any box with ease. It's light weight of just 2 grams means it can be printed in a…
This Fast Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Sword & Shield. It’s part of an ongoing series of Poké Balls adapted from…
While there are a number of tools and methods posted online on how to open this, I didn't have easy access to any of them so I designed a simple tool. This acts as a screwdriver handle for three 4mm hex bits (such as what come from an…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
Note: The .step file for the top is behaving weird for some reason, and it won’t separate into parts properly. The .3mf file should be fine, but you can bypass this by manually inputting filament changes/cutting the body like so: For the…
Es handelt sich um ein kleines und einfaches Modell eines Messers zum Öffnen des Packbands an Paketen und ähnlichem. Es ist 60 mm lang, 25 mm breit und 3 mm dick. Das praktische Loch zum Aufhängen hat einen Durchmesser von 6 mm.…
This is version 2 of the wildly popular mellow labs bin opening device: BOM: Most microcontroller mg995 servo HC-SR04 Ultrasonic Sensor
Key for opening shower drain. While renovating our bathroom, key was lost. I've recreated it from images in manual / brochure, and using drain cover measurements. NOTE: It is created for Pestan Confluo Compact Line drain - but can be…
Remix of AsBurli 's awesome design of a cable duct for Voron 2.4 3D printers mounted to the back panel. This version adds a large opening on the end of the top/bottom piece and uses two screws for mounting instead of one. There is also an…
Little helper to open cup of "Normbrunnenflasche" if force in fingers is missing... (45 teeth internally locking to cup of bottle) Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.24 Infill: 0% Filament:…
A simple tool to help you open and maintain your house's IPEX 3-inch one-way valve, the one that prevents sewage from getting back in when sewer pressure rise for one reason or another. An ordinary 2 by 4 wood plank would usually provide…
Prevents my garage door from running into the enclosure door. Reuse the original stopper/magnet assembly. Add one M4 fastener per side. Printed in PLA.
This model is compatible with the lego system.
A holder that's 4x2x4 gridfinity units to fit my iFixit opening tools, from the Essential Electronics Toolkit . It doesn't have room for the tweezers or the screwdriver + bits, which I keep in separate bins: tweezers holder & screwdriver…
I remixed the Design by NotaBrick by simply removing the openings for the GPIO and the Ribbon-Cable-Connectors since i didnt needed them for my project.
I needed a hinge to mount a .25" polycarbonate ( roughly .220" thick ) to the front of my home made enclosure. The hinge mounts to the outside edge with 3x m5 bolts, allows a 6mm overlap on the front edge of the 2020 extrusion, and allows…
Multiboard holder in hexagonal shape with a 33mm opening and 55m tall overall. Designed as a gluestick holder but works for so much more. Credit to Jonathon at @KeepMaking for the multiboard.
This is a clip to attach the johnniewhiskey cable chain ( https://www.thingiverse.com/thing:2920060 ) to the X gantry, based on the design from ali1234 (https://cults3d.com/en/3d-model/tool/ender-3-extruder-mount-for-cable-chain). It is…
All credit goes to @755123BE for the original design. Just like the original, these covers are designed to be used with “ AeroGarden Seed Pod->Shrouded ”. The original works great and are still my go to when starting out, but as my plants…
NOTE : If you're printing the single extruder version, the two sides of the Yellow H are almost symmetrical, but not quite! Make sure they're lined up properly so they fit the triangle on the top. This Ultra Ball was created as part of…
As a follow-up to this comment , I'm uploading the mirrored version of this great model, with a plus capability where you can place the cables on the side. There is no need anymore for a USB-C extension cable. Notes As the original model,…
This hinge folds nearly 360 degree due to it's double hinge axis. I came up with this design as the available print-in-place single hinges didn't reliably go beyond 180 degree rotation. Update 2025-05-05: Added source files based on user…
Handy and compact drill bit storage case with automatic opening. Print the case, cover and both bit slots with PETG without supports and the links with TPU. You will additionally need a 2mm rod (steel, brass, aluminium) 80mm long for the…
Clean and Prep Remove any supports from the printed parts. Sand the inside of the cylinder where the supports touched, so it’s smooth. Insert Key and Pins Slide the key into the cylinder. Place the larger pins (with rounded ends) into the…
The black rubber lip on the suction opening has unfortunately fallen off. This is a replacement cap that should be printed in TPU.
I recommend to set Printing layers to 0,15mm because of the thread. No supports needed. to close the container use plastic bottle cup typically from a cola or a water. Assembly: Make a hole in a top of Detol container and glue the seal to…
The mechanism is for the specific boat I am repairing, but it could also work for another model. The nut base is for an M3 (3mm) nut and is used to secure the protective propeller guard for easy removal.
The idea for the box popped into my head so I modeled it and printed a small version of the box only. Later I saw the Valentine's Day contest, and decided to throw a heart into it for the contest. I printed the heart at .16mm layers, and…
Remade the front panel to provide a 3.5mm drive opening. Check your clearance. This is a tight fit. Uses a 12mm Button.
This model is remixed from Elegoo's design. However if the filament does not exactly drop in the right place it bends too much or drags. The wider opening allows a smoother feed. I also do not have long enough blots and added an extrusion…
Use something different to hold your ring, this box opens in a unique way. The box itself is print in place, I used 0.4mm nozzle with 0.2mm layer height and fairly standard settings. The ones shown in the pictures are Bambu Lab PLA Matt,…
set for opening laptops, phones, tablets and other electronic devices in 3 variants
This is the original back cover of the QIDI Q1 Pro but with slightly more cooling possibilities on its back.
I use these to cover my Vivariums. They can be glued into a lid or just set onto the container. I originally made this for a glass vessel with a 115mm opening. Use this number to to determine what scale to use in your slicer. D = Desired…
ESP32-CAM Mount for Prusa XL EnXLosure with ventilation openings
As I couldn't open my coolant cap with my bare hands, I constructed this tool. It works in no time at all. ----------------------------------------------------------------- Da ich meinen Deckel für das Kühlmittel nicht mit bloßen Händen…
I recently made an antenna connector passthrough panel for my window. I needed a 1/2" hole on one side of the panel and wanted to make a grommet that I could slide cables into that would stay put inside the hole. I ran my antenna wires…
This Moon Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Moon. It’s part of an ongoing series of Poké Balls adapted from the main…
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
