Filter Opening Tool for WaterFilter "Drufi DFR"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friend of mine asked for help, he could not open the water filter. So I designe one from scratch. Here it is!
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 173
- Wydruki
- 3
- Wyświetlenia
- 584
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Friend of mine asked for help, he could not open the water filter. So I designe one from scratch. Here it is:
TinkerCad → first excerpt printed in PLA, low perimeters, low height. It fitted right at the first shot. A little bit refined, made nicer and done.
Voron 2.4 (350), red HIPS (from "Euroharry"), 245°C nozzle, 100°C bed, 3mm brim (outer), after 3 ½ hours the deal was done. The part fits tight but acceptable! HIPS seems to shrink much more than PLA, so my recommendation for HIPS and probably for ABS/ASA expand the part in X and Y by 1% and you'll be safe.
Explore my other Printables: https://www.printables.com/de/@Tritschi