Filter Opening Tool for WaterFilter "Drufi DFR"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Friend of mine asked for help, he could not open the water filter. So I designe one from scratch. Here it is!
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 173
- Makes
- 3
- Views
- 588
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Friend of mine asked for help, he could not open the water filter. So I designe one from scratch. Here it is:
TinkerCad → first excerpt printed in PLA, low perimeters, low height. It fitted right at the first shot. A little bit refined, made nicer and done.
Voron 2.4 (350), red HIPS (from "Euroharry"), 245°C nozzle, 100°C bed, 3mm brim (outer), after 3 ½ hours the deal was done. The part fits tight but acceptable! HIPS seems to shrink much more than PLA, so my recommendation for HIPS and probably for ABS/ASA expand the part in X and Y by 1% and you'll be safe.
Explore my other Printables: https://www.printables.com/de/@Tritschi