Dremel Pet Nail Grinder (6mm Opening) - V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an implement to assist in the safe grinding of pet nails, without having to spend crazy money.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 159
- Wydruki
- 2
- Wyświetlenia
- 898
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remixed version of the Dremel Pet Nail Grinder (6mm Opening).
In the original, there are two holes to utilize, and both are in line with the tool.
For this version, I turned one of the holes at 90 degrees, so that you can use either in a sideways or straight on orientation.
The holes are still approximately 6mm wide by 12mm long.
I would suggest using something more heat resistant than PLA, as the inner diameter can be a very close fit with the drum of the sanding spindle.
I ended up melting my first attempt, because I was using a very coarse pad to sand down the interior.
Please don't make my mistake.
This does NOT need any supports to make.