Dremel Pet Nail Grinder (6mm Opening) - V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an implement to assist in the safe grinding of pet nails, without having to spend crazy money.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 159
- Makes
- 2
- Views
- 899
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remixed version of the Dremel Pet Nail Grinder (6mm Opening).
In the original, there are two holes to utilize, and both are in line with the tool.
For this version, I turned one of the holes at 90 degrees, so that you can use either in a sideways or straight on orientation.
The holes are still approximately 6mm wide by 12mm long.
I would suggest using something more heat resistant than PLA, as the inner diameter can be a very close fit with the drum of the sanding spindle.
I ended up melting my first attempt, because I was using a very coarse pad to sand down the interior.
Please don't make my mistake.
This does NOT need any supports to make.