1 / 11
DJI Neo Adventure Command Center — transport box, storage crate — PRO version — zdjęcie 1
1 / 11

DJI Neo Adventure Command Center — transport box, storage crate — PRO version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The ultimate DJI Neo drone transport crate - engineered to protect and organize your complete kit for any adventure

Ocena
5 / 5
Polubienia
31
Wydruki
2
Wyświetlenia
1850
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

About DJI Neo Adventure Command Center — PRO
 

Meet the DJI Neo Adventure Command Center: a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This impact-resistant storage crate doesn't just carry your DJI Neo – it safeguards your entire aerial arsenal.

The PRO version includes some nice extras compared to the Free version:

  • Carrying handle
  • Additional accessory pocket
  • Choice between flat and helipad style top lids

From spare batteries to essential tools, every component finds its home in precise compartments, ensuring your gear stays mission-ready for any adventure.

Whether you're scaling mountains, crossing deserts, or navigating urban environments, this fortress keeps your investment protected against the elements. Custom-designed with ease of use in mind, it transforms from secure transport to a mobile workstation in seconds.

Don't just store your drone – elevate your entire experience with a case that's as sophisticated as the technology it carries.

 

Bill of Materials and Sourcing guide

PartSize / StandardQTYSource
M3 bolts (for hinges and latches)M3x40 SHCS6Buy here
M3 bolts (for carrying handle)M3x16 SCHS2Buy here
M3 nuts (for carrying handle)M32Buy here
M3 threaded heat set inserts (for accessory pocket) — M3 * OD:5 * Length: 4mm !M3x5x4 2Buy here

 

Printed Parts

PartsQTY
DJI Neo Adventure Command Center PRO — printed parts10

 

 

Video showcase

 

Print guidelines

Here are print guidelines for you to follow in order to have decent success with printing parts:

3d printing processFDM (fused deposition modeling)
Infill typeSupport cubic, Honeycomb [1] or Grid
MaterialPLA, PLA-CF, ASA, ASA-CF, ABS, ABS+, ABS-CF
Infill percentage25% - 40% [1]
Layer heightRecommended: 0.2mm
Wall countRecommended: 4
Solid top/bottom layersRecommended: 5
Extrusion widthForced 0.4mm


Side notes to the print guidelines


[1] To ensure reasonable combination of print speed, filament usage and structural integrity of the parts slice all parts with Support cubic infill with 25% percentage. Honeycomb or Grid infill with 40% infill percentage is highly recommended for Latches and Handle.

A wall count of 4 is an absolute must to ensure the structural integrity and long life span of the parts.

 

File naming convention

Printed parts use this naming convention:

Primary colorThese files will have nothing at the start of the filename.

Example: lid_x1.stl
Accent colorFiles have “[a]” to the front of any STL file that is intended to be printed with accent color.

Example: [a]_seal_x1.stl
Count of partsFiles have “x1” to “x2” at the end of any STL file. The number represents the count of identical parts to be printed.

Example: latch_x2 (In this case you will need to print 2 identical parts).

Change log

DateChanges
29.10.2024Initial version (Rev1)

Tagi