Cradle for Analogue Pocket (with Cartridge Stabilizer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Take your Analogue Pocket with you and stabilize your wobbly carts!
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
This Cradle is designed to fit the Analogue Pocket console. I always print my Cradles with Fuzzy Skin (0.1 point distance, 0.1 thickness) so the model might need to be sized down by 0.1% if you don't want to use Fuzzy Skin.
This model requires supports: The geometry that interfaces with the Cartridge Stabilizer is printed on supports! I also recommend using support for the overhangs at the bottom. It is very important that your supports are decently tuned in. I prefer organic (tree) supports but use whatever works best for you.
NOTE: This is a departure from my traditional Cradle designs with very low strap mounting points. Larger cartridges and modified Gameboy Cameras might experience stability issues. This is something I hope to address in a future design.
I would love to see your makes!! Please post :)
UPDATES:
…