Liczymy pasujące modele…
I like the original design made by c_anthony but unfortunately his STL file is sliced very bad with Simplify 3D. I redraw it from scratch, removing some material on the bottom for faster printing. EDIT: I made a 45° tilted version. Beware…
Note for non-Russian users: PU-4 is a launcher for special pyrotechnic cartridges that are used to send emergency and information signals. In the Russian Federation, PU-4 is not a weapon, does not require a license. If PU-4 is illegal in…
This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…
*****Update 3/6/2026: Correct Rebated Magnum Tray uploaded. (oops)**** *****Update 3/3/2026: Added Rebated Magnum Tray and Test Piece***** Have you ever forgotten to prime your brass before loading the powder? Me neither. But if you think…
for the model tolerances should be good but I'm not sure, for the hinges use m3-0.5x20 bolts and they should thread into the plastic.
I'm new to 3D printing but I made this model in blender based on the sprite for the game Devilition in ufo50, then I painted it! Enjoy!
An organiser holding 2 TZ (TZe) Brother label maker tapes I use it to keep yellow (warning) and red (danger) tapes at hand Print notes No supports needed Updates log 2024-10-12 Initial version released Support the author The model is free…
This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…
Stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle Holes are intentionally slightly oversized so it's easy to put the items in and out without the risk of scratching the device. Additionally you can slightly tilt your…
Alternative version of my stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle ( https://www.printables.com/model/1068557-stand-holder-for-oxva-xlim-pro-2-vape-pen-cartridg ) One isn't necessarily better than the other,…
Another Christmas, another game for the Kid :) So I got a request to design a simple storage for 4 card games that could be easily used on the go. The holder uses friction to keep the games in place and the same concept is used to keep…
self designed wallholder for Demineralisation cartridge (Füllix Entsalzungspatronen Wandhalter) large opening, for easy hose fitting and slotted holes, for wall screws... use washers to support screws... Category: Household
The holder uses friction to keep the games in place and the same concept is used to keep the holder inside the cover. I have fine tuned the models for my printer tolerances, but it might require some XY Size Compensation in the slicer for…
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you an Imitation of a 9mm Luger cartridge. The cartridge is suitable for an exhibition, for decoration, or perhaps as a cosplay. I used Anycubic PLA Basic as…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 5.56 NATO cartridges. The cartridge is suitable for an exhibition, for decoration, or perhaps as a cosplay. I used Anycubic PLA Basic as the…
A cartridge shell for a Kung Fu Flash cartridge, and it should work fine for the Kung Fu Flash 2. Tolerances are pretty tight, but that means there's very little movement of the PCB inside the shell… Unlike the model I derived it from,…
See the repository on Github Customizable, 3d-printable model for a 510 cartridge holder. Holds 3x 510-style cartridges vertically. Assumes 45mm long carts with Ø 11mm, or edit the OpenSCAD source to customize.
This is a reusable 110 film cartridge. My original design is for a "fast" film speed, but I have added a "slow" speed cartridge too. You can cut 35mm film into 110 by cutting it in half (in the dark, carefully). Various people on Etsy…
I loved George's model but wanted something a little more snug. To achieve this, I got the inside dimensions of the Gameboy Cartridge slot and added it to the model base. I also created a tall version for extra protection. Prints with NO…
Hi, We've got a Pneumatic Dispenser at work to apply mostly 1K silicone glue ... but lately the foot switch stopped working. This is our fix. A tact-switch operated grip designed to hold our standard 55cc/approx. 2 oz dispenser cartridges…
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the cartridge as possible, a support on the back to help…
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the cartridge as possible, a support on the back to help…
I Printed this Ti99/4A cartridge holder to hold my collection of cartridges, I added grasp holes in the center to better procure the cartridge you want. I added tapered holes in the back for wall mounting. I printed this on my Bambulab…
Transform your TCG card collection into a nostalgic piece of gaming history with this Game Boy cartridge-designed deckbox! A tribute to the iconic handheld console that started it all, bringing the magic of the 90s to your card…
This is a remix of a remix originated by @nolibert's design for the non-North American SNES cartridges then remixed by @jordanhoff for the North American cartridges. After printing off a couple of these I felt they could be better…
These are the body and screw-on lid for a container that can be used with fine grain activated carbon as a passive, immersible filter. Print both parts in spiral vase mode with 3-4 bottom layers and 0.2 mm layer height. Works perfectly…
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Fix Build Explore created a wonderful Packout insert to hold a P-Touch D610BT and TZ-e tapes. This is a secondary case to go in a second Packout case to hold extra TZ-e tape. This has three rows to hold many more cartridges. The insert is…
Protective holder for a spare Alpinstars Tech-Air 5 Cartridge. Share your Make :)
print with suports for smoother finish use variabile layer hight bend the conecting part to close the cartridge Edits: v6 - small adjusments v7 - adjusted placement, stronger joint
This is a brace/clamp/clip thing that simply push fits onto the front of the standard size Nevermore Mini (see link at bottom of description) and fastens down using the top two screw holes connecting the front plate to the base part of of…
Large enough to hold 6 cartridges. You may need to size it up by a small percentage if the default printing tolerances are too tight to take cartridges. I expanded it along the Z by 4 mm and widened it by 4mm as well, but this creates a…
Englisch In search of a more cost-effective solution to the original filters for the Zehnder ComfoSpot 50, I developed a replacement filter cartridge. This filter cartridge can be filled with a G4 filter fleece or a G4 filter mat, for…
Needed a case for a cocoFlash that I acquired. But I didn't find many model that were parametric, so I could add my own PCB So here you go, I don't know much about the Dragon Computer, but it should fit that computer as well
My version is designed to use the same hardware and filters as Foppemoa's design, but assembles differently. To assemble, press the "Blower Exhaust Grille" into the "Blower Mount", then screw the blower fan into the Blower Mount (It'll be…
After purchasing multiple off-the-shelf Game Boy cartridge display stands, I found that most of them tip over easily once fully populated—especially when mixing original Game Boy, Game Boy Color, and Game Boy Advance cartridges. Rather…
Made this for my bike maintenance. It can hold a grease cartridge or tube as well as an acid brush. I wrap the bottom of the tube with duct tape so the pop top doesn't open. Because of the tape it's a little bigger than it needs to be;…
Converts 35mm film to digital using a 64MP 4K sensor, with a longer 500-750mAh battery, Wi-Fi photo transfer, a Raspberry Pi Zero 2W, and a heatsink! parts list Arducam OwlSight for Raspberry Pi Camera Raspberry Pi Zero 2 W WatangTech Pi…
System 573 Security Cartridge Shells These files allow you to create either replacement shells for your existing (and presumably damaged...) security cartridges, or allow you to make new cartridges such as if you were going to create a…
Description: Keep your Nintendo Switch collection organized and accessible with this compact desktop stand. This minimalist design is perfect for displaying your favorite titles while keeping the game cards right at your fingertips.…
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
The stand is designed with a low center of gravity and a widened base to resist forward tipping, even when fully loaded.
A simple cap that screws on the threads of common CO2 cartridges (either 1/2" x 20TPI UNF or 3/8" x 24TPI UNF) to protect the threads or adjacent items form damage when the cartridges are packed in a bag, carried in a pocket etc. The 1/2…
I created this for my Nintendo Switch Lite Case before realizing that it served a purpose of a cartridge holder well on its own. Not wanting to force people to print the whole Lite case for the holder I created these. They are light,…
I want to down size my saddle bag, but still want to keep 25g co2 cartridges. Given the saddle bag I got is hard shell with quick release, it does not come with external strap for the CO2 cartridges. Therefore, the only option for me is…
NOTE: After making the model and printing it i noticed there are some extra "circles", therefore i have made a "perfect" version which doesn't include them, both versions of the model are available though PRINT WITH THE SD ICON FACING DOWN
*****Update 3/6/2026: Correct Rebated Magnum Tray uploaded. (oops)**** *****Update 3/3/2026: Added Rebated Magnum Tray and Test Piece***** Have you ever forgotten to prime your brass before loading the powder? Me neither. But if you think…
I made this Makita replacement piston for the DCG180 because I thought the original one was getting filled with sealant in all the corners. I used 100% infill and PTE. I used an ear plug to close the holes so that no sealant would get in.
These are connectable storage containers for the Brother P-touch TZe tape / label cartridges. I looked around for a good solution for this and was unable to find any. Those I did find were set for a specific number and size of cartridges…
A unique 3D printable creation — this Turntable Cartridge Alignment Protractor Gauge, Overhang Adjustment, Setup Tool Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Note: Print standing up on the printers finest resolution, since the threads are fine and tolerances are tight. I recommend printing the STEP file and not the STL. A nozzle for 310 ml/0.1 gallon sealant cartridges that actually fits. The…
This is a small Gridfinity Window with 4 Holds. In all Holds you can put an Storage Element where you can choose from 3 Different. 1: Blaze Evercade Cartridge (stores 3 Blaze Evercade Cartridges) 2: Nintendo® DS/2DS/3DS Cartridges 3:…
Bei der kleinen Zenit S sitzen die normalen Filmpatronen zu tief im Gehäuse, was dazu führt, daß der Film leicht schräg durch die Kamera läuft. Mit diesem Distanzring wird die Filmpatrone auf die richtige Höhe im Gehäuse gebracht und der…
A box to store the cartridges from the Pokemon Game Boy Jukebox music player. Edit: Added a second version that holds the player and the CAD files
Hello, Sharing my project of stand for Nintendo Switch with place for 11 cartridges. Fits all versions, Switch v1/v2, OLED and Lite. Dimensions: 120x60x50mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month…
Hello, Sharing my project of stand for 20 Nintendo DS and 3DS games :) Dimensions: 56 x 176 x 86mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
I've desiged this to decant a Miele DOS cartridge into another Miele DOS cartridge. So you don't have to waste the rest in a empty cartridge and you can also use/fill a "standart" cartridge with your own laundry detergent and don't have…
I added more blade options giving room to attach the smalll triangle one and a rectangle 19X40mm one which is just what i have on hand
This is a remix of the upper side of the nice Sidekick64 Cartridge Case by bigby. I have added 2 more holes to see all 4 LEDs. Further I have closed the jumper holes at the front. Since I use my Sidekick64 only with a C64 I saw no need to…
The device is used to filter water using filter cartridges from Brita. I use the Brita maxtra pro cartridge, which is designed for extremely hard water. The hardness of the water will not be completely removed, but it will greatly reduce…
Own a piece of firearms history with this detailed 1:1 replica of the 58 Schubarth cartridge —a true collector's rarity. Once nearly impossible to find, this beautiful and unusual cartridge can now be printed and displayed by anyone with…
This spacer is helpful to place the display of an Sidekick64 with the correct spacing to fit inside the Sidekick64 Cartridge Case by bigby: https://www.printables.com/de/model/122968-sidekick64-cartridge-case The spacer by JustinC144 is…
Hello, Sharing my project of display stand for Gameboy cartridge game. Stand fits cartridges from Gameboy Classic, Color, Advance, and possible some other cartridges as well in similar size :) 🚀 Want to sell prints of my models? Subscribe…
This is a set of game cartridge cases designed as playful storage objects, inspired by iconic retro gaming shapes such as a star, a mushroom, and a power block. Inspired by classic games (e.g. Super Mario-style iconography).
Keep your Nintendo Switch games organized and easy to access with this clean, minimal cartridge holder + stand combo. This design holds up to 10 game cartridges and doubles as a display stand , making it perfect for your desk or gaming…
for the model tolerances should be good but I'm not sure, for the hinges use m3-0.5x20 bolts and they should thread into the plastic.
Compact two-part enclosure for the ST2VGA ENHANCED and ST2VGA adapter by Sidecartridge . Protects the PCB and provides tidy access to the VGA connector, the 3.5 mm audio jack, and the slide switch. What this is An enclosure sized to the…
My design is not the best at all and is very crude, but it does the job nicely. Two M5 bolt are needed to attach the lever and the triger, though it could be replace with a printed cylinder if you don't have the screws under hand.
Version 1.0 of a mandrel and cutout template for producing paper cartridges. Measurements are taken from The artillerist's manual and British soldier's compendium.
A flat nozzle for silicone or caulk cartridges. Remix of:
This model is a modification for pool filter systems (type 602/220) that replaces standard paper cartridges. It allows using polyester fiber (synthetic padding) or filter balls instead of disposable cartridges. Advantages: - Reusable…
Used thread: M27 x 3. I recommend using the finest layers because the thread is much smoother than.
This is a blank cartridge intended to be used with any springer that takes shellington flypoint shells. Do NOT use these for the flypoint or any flywheeler, as they are not designed to shoot anything out of them. It is recommended to fill…
Remix of a remix. I wanted to print a wall mount for my Switch 2. Found a base version, one with ventilation holes, and one with a cartridge holder. To my surprise, there wasn't any that combined both... until now! Recommend to print in…
This is a remix of another model designed to hold GBA games on both sides of the shell rather than just one. I was even able to fit Boktai in by removing two of the little stabilizer tabs. Prints in place. Tolerances were pretty tight…
Printed on Anycubic Kobra X with Material4Print Pla - Leuchtorange ( https://www.material4print.de/collections/pla-filament/products/pla-leuchtorange ) Printer settings: Layer height: 0.2mm Supports: Tree (organic) Infill: 15% Infill…
This replacement cartridge bracket will let you play Japanese titles on your US N64. Simply disassemble your N64 and replace the existing cartridge slot bracket with this universal bracket. It’s that simple. Install Guide Updated design…
Two models: One for nine pieces of CO2 cartridges, made for screwing it to e.g a piece of wood One single holder Print with TPU , 95A should be soft enough
This cartridge comparator set functions like the Hornady Lock-n-Load Bullet Comparator Set and a functionally similar 3-D printed comparator set available on Etsy. It attaches to your caliper jaws magnetically to allow measurement of the…
These are 1x2-grid storage boxes for Brother P-Touch cardtridges. The boxes are compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have…
Will not need any supports but the threads are decently fine so it is best to print it at 0.2mm layer heights or less to make sure that you get good thread definition. Once printed the plug can be filled with any form of weight you like,…
Update 30-3-26: optimized some dimensions to make the cut a bit deeper. (The caulking tubes differ slightly between manufactures), What is a painter without his trusty caulking gun, for sealing windows, for hiding cracks in the corners…
A stand to proudly display your loose Pokémon mini cartridges. Designed to keep the cart stable, holding it loosely enough that it can be lifted off. If you need to use 2 hands to remove the cart from the stand, it needs some cleanup.
I really like my models to be scaled correctly so I sat next to my gaming cartridges using them as reference when making this. It still isn't perfect but I 'm happy with it. Open to feedback. Will also be working on some of the other…
I really like my models to be scaled correctly so I sat next to my gaming cartridges using them as reference when making this. Updates: January 02, 2024 - Added v2 which has a cleaned up logo area. The original version had weird layers…
Remix of Original File by Tmarentette . None of the other models available fit my setup the way I wanted, so I remixed my own (with some emphasis on retaining STL quality). V2 (best) Slightly looser fit then V1 but allows for 1 handed…
This is a 5-cartridge clip for .30-30 ammunition. It is remixed from @MrW3D_37548 's Ammo Clip to be much more compact and also compatible with my 30-30 Lockbox . Print with supports (on build plate only works well), with the center “tab”…
This is a replacement shell for IGS PGM Cartridges. Especially if you are looking for a case for your Fluffy boards. Mine were printed in PETG at 0.2mm layer height. I had to add 2 additional screws to the edges where the cartridge slots…
This is a remix of c_anthony's Game Boy Cartridge Holder that holds 12 cartridges and cuts it to 10. This allows it to be printed on smaller printers. This will hold the cartridge with the dust covers on them. You can also print adapters…
The Atari 800 computer has a cartridge door that springs up when the latch is pushed. The latch has a spring made of a flat, bent piece of metal. When the case is intact this spring is retained by two surprisingly thin plastic posts. 40…
Do you find yourself looking for ways to display all of your Nintendo Switch games you've collected over the years? Let's not hide those suckers away in storage! This model is a 60% scale (mostly accurate) N64 game cartridge that fits a…
Do you find yourself looking for ways to display all of your Nintendo Switch games you've collected over the years? Let's not hide those suckers away in storage! This model is a display case for my 60% scale (mostly accurate) N64 game…
![[ALCH] Brother P-Touch cartridge storage (ModuBox)](https://media.printables.com/media/prints/484289/images/3955956_58f3adfd-c8ac-4353-abaf-0a63f5395332/ptouch-22.jpeg)
