1 / 5
Cap for Caulk, Silicone or Glue Cartridge (Custom Buttress Thread)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a fitting with calculated buttress thread profile with proper thread termination/runout. Multicolor printable.
- Ocena
- 5 / 5
- Polubienia
- 156
- Pobrania
- 1060
- Wydruki
- 13
- Wyświetlenia
- 2476
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 13) (Komentarze: 29)Remiksy (0)Kolekcje (212)Powiązane
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought adapters do! Enjoy!
There is a blank version and three other versions featuring letters C, G and S for caulk, glue and silicone.
** 1/1/2025: Added versions with a center plug ** (See Drawings, (2) - versions)
Designed in Solidworks