1 / 3
Minolta Camera 16mm Film Cartridge — zdjęcie 1
1 / 3

Minolta Camera 16mm Film Cartridge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

16mm film cartridge for the Minolta 16 camera. This can also fit the Kiev 16

Ocena
5 / 5
Polubienia
53
Pobrania
834
Wydruki
5
Wyświetlenia
2739
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

Minolta Camera 16mm Film Cartridge

 

Printer:  Bambu P1P

Nozzle:  0.4

Profile:  0.12mm Fine @BBL P1P

Filament:  Overture PLA, Black

Model must be printed using a 0.3mm wall width to insure that the fit tolerance is maintained.

----------------------------------------------------------------------------------------------------------------

I have added an image of the cartridge with a strip of flocking tape attached to each side of the film pass through slot. The flocking tape fits just right to stop 99.9% of the light from entering the film cartridge and still allow the film to slide in and out.

The flocking tape I used was VCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 1/2 in. x 300 in. (Black)

https://www.amazon.com/J-V-Converting-FLOCK-1-BLK2833-Flocking/dp/B01B5FNRA8?ref_=ast_sto_dp&th=1

 

Tagi