P
PrintablesDarío Bustos
curtain holder - porta cortinas 16mm
porta cortinas hecho en fusion360
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: 16mm
Liczymy pasujące modele…
P
Printables
Colonel Wasp 77 --- Standard 16mm barrel replacement mount (Shell cutting needed)
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
P
Printables
Single and Dual 16mm Conduit Wall-Mount Holders
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
P
Printables
Bresser Weatherstation adapter on 16mm square steel
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
P
Printables
Replacement 16mm Towel Bar Bracket - No Supports
My towel rack broke so you know what had to happen!
P
Printables
top hat grommet for 16mm pipe
created a top hat grommet for a 16mm pipe / hose to be inserted to make various things and appartises printed in tpu 100%infill outter diameter 19mm inner diameter 16mm flat top disc 26.5mm
P
Printables
Dart zone Solo Barrel Options for 16mm OD Barrels that allow barrel accessories
This is a drop in barrel replacement for the Dart zone solo pro, that allows the addition of a longer metal barrel and/or the addition of and 16mm OD barrel accessories. Simple, straightforward design that just works. This was made via a…
P
Printables
LED 16mm star pcb mount
This is a custom 3D-printed holder for standard high-power LEDs mounted on 16mm star PCBs. The mount is designed to securely hold the LED board and allows for easy attachment to various surfaces using m3 screws. No more hassle with gluing…
P
Printables
Canon RF 16mm and 50mm lens gridfinity bin
I wanted the lens to lay lengthwise so that the model is visible, instead of the end cap.
P
Printables
Govee H5075 GrowBox/16mm Holder
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
P
Printables
Tapo C200 Growtent/16mm Pole Holder (inverted)
On my last run i had it just in a corner shelf, but i had the Problem the cam couldnt be turned enough downwards. After looking around and not finding one that fits how i need it to fit, i designed my own Model. It is intended to be…
P
Printables
16mm Nerf Barrel BCAR and PCAR attachment
THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…
P
Printables
Peggit Holder (Craftsman 16mm Ratchet Combo)
Will need the mount from the excellent work here:
P
Printables
Nerf Pcar for 16mm od nerf barrel (no supports)
Find an improved and tested version of this model here I modeled this in Onshape but keep in mind, this model has not been tested although i think it should work fine but it probably will reduce FPS a lot because of the FDM layer lines.…
P
Printables
Pokemon Mini Tin Insert 16mm Dice & Small Coins
Pokémon TCG mini tin insert designed to hold 14× 16 mm damage counters or D6's, 5 smaller coins, and 2x status markers
P
Printables
OXO Grater Base Bowl (76×116mm) – Remix
This is a grater base bowl designed specifically for OXO brand graters with a 76 × 116 mm base . I originally liked the All-in-One Grater Base Bowl by Chopper Originals , but the sizing didn’t match my grater. Instead of forcing it, I…
P
Printables
Kartenbox (Cardstorage) für Doppeldeutsche Spielkarten (Doublegerman Gamecards) bzw. Stapel 100x63x16mm
PLA oder PLA+, drucken, fertig
P
Printables
Super Clamp for Modular Mounting System (16mm)
This clamp came from my search for a quick-attach clamp that was easy to 3d print for a system I am building. While it doesn't have high enough grip friction for my initial requirements, I think it is potentially useful enough to share.…
P
Printables
Tapo C110 Growbox Pole Holder (16mm)
A remix of the 22mm version to fit a 16mm pole (e. g. Homebox Q80+)
P
Printables
Spulenadapter Super 8 / 16mm Film
Hier ein Adapter, um Super 8 Spulen auf einem 16mm Umroller verwenden zu können. Am Besten mit einer Fülldichte ab 80% drucken.
P
Printables
16mm tube cap tool fixed
the original 16mm cap tool is too big for the square hole so i made is smaller so it fits
P
Printables
Wardrobe Hook for 16mm Tube
This is a replacement hook for cheap, tube-built wardrobes. Inner diameter 16mm
P
Printables
Dyson V10 transition piece to Ø16mm tube
Transition piece to put any length of 16mm PVC on your Dyson V10 (and beyond). Ideal for radiators and other tight spots. The connector is compatible with Dyson vacuums, but in design optimized for 3D-printing. Seperate connector is also…
P
Printables
Ampoule holder ∅16mm *10
ABS to resist high heat, orange for style With edge and glue Perfect for amino acid analysis protocol
P
Printables
Stroz & Bickel Mighty+ Crafty+ 16mm Bubbler Adapter Mold
This is a mold to cast a adapter for the Storz & Bickel Might+ and Crafty+ vaporizer to combine it with a bubbler that has a 16mm glass tube. This Adapter MUST be casted from high temperature two component silicone! Don't use standard 2k…
P
Printables
Pokeball cover for 16mm momentary switch
In building a pikachu themed PC, I made this cover for use on the momentary switch. It can be glued on or attached with double-adhesive tape onto 16mm switches with a 12mm button diameter. I advise ironing or sanding the back side so that…
P
Printables
Worker thread to 16mm OD nerf barrel adaptor
A worker barrel thread designed to fit into 16mm barrel chambers. the ID of the chamber is around 13.5 to be printed between 13.2 and 13.3 mm Id to accomodate Oring sizes and reduce friction/wear from layer lines. This is a printed…
P
Printables
ps5/xbox/pc/console game holder shelf mount for 16mm shelf
ps5/xbox/pc/console game holder shelf mount for 16mm shelf fits the ps5 game holder as shown in photos, not created by me shelf mount(s) created by me in fusion will need atleast 3x v2 per game shelf, recommend also printing 2x v3 per…
P
Printables
Welding Table 16mm pipe support
Centering pin with centering prism Welding Table 16mm pipe support
P
Printables
Plant clip for 16mm sticks
Spring is coming and this year I want to use a different model that breaks less. I coded this model inspired on I did not use AI to create the model of the clip. I however let AI format the openscad code as last step for your sake.
P
Printables
Little Rocket Barrel Adapter for 16mm or similar OD Barrels
This Little Rocket Adapter is a coupler designed to attach Little Rocket Barrels (or my Little Rocket PCAR) to 16mm or similar OD exposed metal barrels. In combination with my Little Rocket PCAR, this allows you to leave your Little…
P
Printables
Thermometer - Hygrometer-Holder 16mm Pole
Simple clip to mount your thermo-hygrometer directly onto 16 mm grow tent poles. Secure fit, clean positioning, easy to read. Use PETG for flexibility and crack resistance.
P
Printables
V Slot 2040 Aluminium Extrusion Joiner ( 16mm )
Simple, with all the work done by @sulli18 and all I've done is create a joiner using the 16mm end caps. It wouldn't take much to create a 10mm version, should it be needed. When printed, make sure all supports created are removed, so…
P
Printables
Hanging Slip Over Hook J Shaped - Sizes 12mm 13mm 14mm 15mm 16mm - for Door Cabinet Shelf Wall
A basic J shaped hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to 16mm.…
P
Printables
nerf n-strike barrel lug for 16mm diameter barrels
a way to let your nerf hobby barrels have an n-strike barrel on them
P
Printables
16mm Phone Holder Ball RETIRED
I made this to replace a base for my mount and it fits all sizes, just make sure to measure if you need 16, 17, 18 or more MM, ajust it in the slicer, takes 15 minutes to print. made to fit M3 screws and bolts takes more or less 15…
P
Printables
Mirrotation 16mm coupler
This is a coupler to link mirrotation device to 12mm button. See : The SolidWorks files are given so you can adapt the coupler design to other telesopes. What do you need : 3 x (brackets + base) 15 x Ruthex M3 inserts 3 x magnets (see…
P
Printables
Blowgun Nail Dart Holder (16mm Barrel, 3mm Nails)
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
P
Printables
16mm Corrigated tube gland m20
A connector used to attach a corrugated conduit to a switch or plug box via an M20 threaded entry. It ensures a secure mechanical connection, provides strain relief for cables, and maintains sealing against dust and moisture, typically…
P
Printables
GXP Crank Bolt Socket Adapter 10mm to 16mm
Hex socket adapter that converts a standard 10mm Allen/hex key into a 16mm hex socket, specifically designed for tightening and loosening the GXP crank spindle bolt (inner preload cap) used on GXP-compatible cranksets such as SRAM,…
P
Printables
Modular Hex whoop gate system for 16mm pipe
I would recommend to print in something strong and a bit flexible like petg
P
Printables
16mm PC water cooling tube 90-degree bend support
This is a support to make a 90-degree bend in 16mm flexible tubing without causing a kink. It's similar to what is used in plumbing with PEX tubing. I printed it standing up with organic supports and a 1mm brim. I used PETG to resist…
P
Printables
16mm Diamond engraver Bit holder for 44mm 775 motor TTC 450 CNC
A 16mm shaft Diamond engraver Bit holder for 44mm 775 motor hole in TTC 450 CNC Print two components
P
Printables
SKADIS tape holder (16mm tube needed)
I saw @ Manicken 's adjustable tape holder and looked like a great idea. I saw that there was a step file on the model, and given that I had some 16mm plastic tube I used the step file to remake the model to fit those tubes. The tubes…
P
Printables
Clip-On Corner Shelf for 4" Pots (16mm Grow Tent Poles)
Description: I needed a simple way to give cuttings and small plants more light in a crowded tent, so I designed this clip-on corner shelf. It snaps onto standard 16mm tent poles and holds a 4" pot securely, turning unused corner space…
P
Printables
Hanging Slip Over Double Hook J Shaped - Sizes 12mm to 16mm - for Door Cabinet Shelf Wall
A basic J shaped double hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to…
P
Printables
Blood Draw Tubes - 13mm and 16mm
Contains 13x75mm, 13x100mm, 16x75mm and 16x100mm tube models, plus 13mm and 16mm caps with 0.2mm tolerance included
P
Printables
16mm/110 Film Carrier for Full Border DSLR Scanning + Riser Kit for CS-LITE Light Source
Remix of Evan Dorsky's 35mm holder modified to accept 16mm/110 format film. Gap reduced in Carrier Top and Carrier Base, and a plate added to the base to interface with the original riser. The following parts are unmodified from the…
P
Printables
RepRack Hanger for 16mm or 21mm
The original RepRack system uses EMT which is hard to find in Denmark in the correct sizes at reasonable prices. Thankfully CNC Kitchen made a design using IKEA HUGAD and supplied STEP files, however, I found tubing in a local hardware…
P
Printables
Feinwerkbau 16mm front sight insert
The right tab (the one with the size printed) should be 4.0mm. Print one and measure that tab height, then enter the proper offset in the corresponding parameter and make the final print. For me, when printed without offset the right tab…
P
Printables
16mm die for Shadowrun
This die design is specifically tailored to the needs of a TTRPG Shadowrun player. The faces 1, 5 and 6 stand out. 2, 3 and 4 are pulled back and muted. The preferred print orientation is with the face 3 touching the print bed. To achieve…
P
Printables
Cult of the Lamb Knucklebones Dicegame (16mm Dice)
3D printable version of the Knucklebones minigame from "Cult of the Lamb" videogame. I watched the video from Makersmuse, which inspired me to create the board game from scratch with a few improvements / changes. I designed the game to be…
P
Printables
Cinnado D1 16mm Grow Tent Mount
I was in need of an aesthetic way to mount my new Cinnado camera into my growbox to watch my plants growing. It fits the 16mm poles pretty snuggly. You need the following parts: Cinnado D1 camera (Amazon) The mounting plate that comes…
P
Printables
16mm hose end cap connector
End connector for 16mm irigation hose. I recommend printing from ASA for outdoor use.
P
Printables
Adapter 16mm auf 19mm mit Bund
Beim Regalbau für Spulenhalter hatte ich nicht nachgemessen und mehrere Regalhalter gedruckt für 19mm Holz oder Alu-Staebe. So habe ich schnell mit OpenSCad den Adapter gemacht und 12 mal gedruckt. Nichts besonderes kann aber einmal…
P
Printables
Nexus Pro X (NPX) Muzzle Adapter for 16mm __CAR Attachents
This adapter press fits into the stock NPX muzzle to allow you to add any aftermarket 16mm __CAR you want without needed a longer barrel.
P
Printables
Vortex Funnel with 16mm Pole Mount and hose spout
Since there is not much room inside my grow tent to move around with a watering can, I use a hose to water my plants. Being able to attach this funnel inside my tent makes it easier. I'm using a 10mm hose, but the hose spout should fit…
P
Printables
Slingshot for 16mm munition
Printable on a Prusa Mini Hardware: 1 meter of 6mm bungee cord I believe the assembly is pretty simple and can be figured out with a simple look. I will post my munition as a separate model. Tip: Sand the beginnings and ends of the barrel…
P
Printables
18mm to 16mm Silicone spacer cutting jig for Ender 3 V3 SE
this is a super simple 18mm to 16mm cutting jig for silicone spacers, i made this because i bought a silicone spacer pack from Creality that had 3 18mms when i needed 2 16mms and 2 18mms. you can use a regular flat blade razor for this,…
P
Printables
nozzle box v6x16mm for creality k1, artillery
I suggest using a material resistant to higher temperatures, so you can safely put away the nozzles freshly removed from the printer. I printed mine out of abs.
P
Printables
0.5 inch PVC pipe to 16mm drip hose adapter
I needed an adapter to connect 1/2 inch PVC to 1/2 inch (16 mm) dripline. This fits Rain Bird dripline tubing. I just press-fit the connections together. With a 25 psi regulator, it seems to hold well. With full pressure press fit does…
P
Printables
Pad for Tailonz 16mm Bore Bi-axis Pneumatic Cylinder
I made this pad to fit snugly onto the push plate of a cheap pneumatic cylinder to avoid leaving marks on the wood it is pressing. I used a relatively stiff TPU, and the voids barely deform at all. You could easily use a softer TPU and…
P
Printables
Herramienta Precisa para Proyectos de Carpintería Escuadras de Ensamble en X y T para Muebles de Melamina 16mm
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…
P
Printables
xTool F1 Laser - Base Plate - 16mm Dice 5x5
I needed a drop in base plate for my xTool F1 Laser to hold a grid of 16mm dice in place. The slot is 16.5mm square, allowing for tap if you need it. Be sure to use alignment laser to get it perfectly centered.
P
Printables
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…
P
Printables
Wall clip for 16mm flexible conduit
If you liked my model buy me coffee at https://ko-fi.com/vestalux
P
Printables
Simple Orange Muzzle Tip Cover for Nerf Hobby Barrels (16mm OD metal barrels)
This is a simple muzzle cover for Nerf hobby barrels (16mmOD metal barrels) which adds an orange tip, and prevents core-sampling (injuries from being hit with the exposed end of a metal barrel). This muzzle does not affect the accuracy or…
P
Printables
cable clip for 16mm frame grow tent
This should only be used for routing cables or ropes. It is not intended to support heavy weights. I utilized standard PLA for this purpose. At present, I lack long-term data on its durability and resistance to deformation under various…
P
Printables
Corner shelf for 16mm grow tent
I added some wholes to tie ropes to it. If you require additional grip, apply a strip of thin foam rubber tape to the inside. To attach it, begin with the top part, then gradually press down on the lower sections bit by bit. Super tight…
P
Printables
Hook for 16mm frame grow tent
Just another hook for a 16mm frame. I used PETG for it. I'm looking to design a hook that's not only easily accessible but also capable of organizing cables efficiently.
P
Printables
Logitech C920s arm for 16mm frame grow tent
You can use it for a Logitech C920s webcam. I added a little border in case you want to place other stuff on the arm / shelf. If you require additional grip, apply a strip of thin foam rubber tape to the inside. To attach it, begin with…
P
Printables
Colonel Wasp 77 --- Standard 16mm barrel replacement mount (Shell cutting needed)
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
P
Printables
Staffa con ganci, Bagno - Lavanderia 16mm
Staffe e ganci per bagno PETG. Da un ferramenta procurarsi e tagliare una barra di alluminio o plastica Diametro 16mm, lunghezza a scelta. Usare viti o colla per attaccarla dentro ai ganci laterali Distanza tra i fori 20mm
P
Printables
PipeJoint for 5/8 (16mm) pvc tubes
Build a pillowfort, blanketfort, crazyfort or kussenfort (Dutch) with standard electrical tubes. I printed 30 joints and 10 joints for on the floor
P
Printables
16mm nut for PC4-M10 PTFE fitting
Couldn't find a nut in the local hardware store that fit so I printed a small nut to mount some PTFE couplers to my drybox. No internal threads, but its easy enough to tap them with the fitting themselves. Use a 14mm wrench/socket to…
P
Printables
M8x16mm Coarse socket cap screw
need two, printed in PLA 0.15mm structural all standard setting
P
Printables
Loudener - Novelty PCAR for 16mm barrels
Silly loudener (Pun intended) that is hopefully not that obstructive. You will also need to print a collet from the original files (make sure to give silly a like also) and a 16mm ID o-ring to get a functioning seal. Print upside down,…
P
Printables
Paper towel holder 16mm mounting
Nice and helpful towel holder I designed for my kitchen cupboard with 16mm holder width. Round towel holder is 40mm widt
P
Printables
Holder for twelve 16mm flexible conduit tubes
Each tube slot has an inner lip to ensure the conduit stays firmly in place. The bottom part is first screwed to the wall, and the top part then secures everything with screws that pass through both parts and into the wall. Made for 3mm…
P
Printables
Single and Dual 16mm Conduit Wall-Mount Holders
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
P
Printables
Bresser Weatherstation adapter on 16mm square steel
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
P
Printables
pipe bender 16mm alupex/10mm PVC copper aka microbore
Hand bender for 10mm pvc coated copper and 16mm alupex please print solid.
P
Printables
pipe bender 16mm alupex/10mm PVC copper aka microbore
Hand bender for 10mm pvc coated copper and 16mm alupex please print solid.
P
Printables
Washer - 4mm Tall, 16mm Outer Diameter, 7 mm Inner Diameter
This is a 3D printable washer that has a 4mm depth, an outer diameter of 16mm, and an inner diameter of 7mm.
P
Printables
Brushless Drone Motor Adapter 12x12mm to 16x16mm
Use heated inserts (on motor side) to mount this adapter to your motor with 16x16 moutingholes and mount it to your frame with 12x12mm mountingholes. I used M2 inserts and screws to mount everything to the frame and M3 screws for mounting…
P
Printables
Furniture Shelf Support Peg/Pin/Dowel Replacement (~5mm OD, ~16mm Long) (Target Bookshelf)
This is a strong printed replacement for a furniture peg/pin/dowel, used to hold up a bookshelf shelf. 5mm diamter, 16mm long. Flat print for strength. Print it using all walls (like 8 walls). Specifically, I made this to replace a…
P
Printables
Just another Ring gauge. 16mm 17mm 18mm Innerdiameter
16, 17 and 18mm inner-diameter ring gauge. ring itself is 2mm thick. 3mm high. Thanks. Category: Rings
P
Printables
Cable tube clamp 16mm for mounting with cable ties
The clamp has a slot for mounting with a cable tie. Suitable for installation tubes with a diameter of 16 mm.