1 / 2
Desk Monitor Stand (16mm height board)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a sturdy stand legs that would allow fitting Audioengine sidewise.
- Ocena
- 4,5 / 5
- Polubienia
- 1028
- Pobrania
- 1487
- Wydruki
- 3
- Wyświetlenia
- 14 350
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (2)Kolekcje (1057)Powiązane
I printed with 3 walls, 4 tops, 3 bottoms, 15% cross-hatch infill, 0.2 layer height (for better layer adhesion) in Sunlu PLA+.
Model has slight chamfers to insert a board (600x210x16mm).
In case anyone wants to update the legs to their size, here's an onshape link to the design:
https://cad.onshape.com/documents/bf67278e03349017cb606c60/w/fa8d3208548e4b29a0c0fe79/e/4257b2d2bfc65a4760dfdf25?renderMode=0&uiState=666028096259df03ebbca07b
