1 / 2
Furniture Shelf Support Peg/Pin/Dowel Replacement (~5mm OD, ~16mm Long) (Target Bookshelf)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong printed replacement for a furniture peg, used to hold up a bookshelf shelf. 5mm diamter, 16mm long. Flat print.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 457
- Wydruki
- 3
- Wyświetlenia
- 1076
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (0)Kolekcje (94)Powiązane
This is a strong printed replacement for a furniture peg/pin/dowel, used to hold up a bookshelf shelf.
5mm diamter, 16mm long.
Flat print for strength. Print it using all walls (like 8 walls).
Specifically, I made this to replace a missing peg on my Target bookshelf. But I'm sure there's TONS of other mass-produced furniture that uses these same pegs/dowels/pins.