Minolta Camera 16mm Film Cartridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
16mm film cartridge for the Minolta 16 camera. This can also fit the Kiev 16
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 834
- Makes
- 5
- Views
- 2,739
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Minolta Camera 16mm Film Cartridge
Printer: Bambu P1P
Nozzle: 0.4
Profile: 0.12mm Fine @BBL P1P
Filament: Overture PLA, Black
Model must be printed using a 0.3mm wall width to insure that the fit tolerance is maintained.
----------------------------------------------------------------------------------------------------------------
I have added an image of the cartridge with a strip of flocking tape attached to each side of the film pass through slot. The flocking tape fits just right to stop 99.9% of the light from entering the film cartridge and still allow the film to slide in and out.
The flocking tape I used was VCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 1/2 in. x 300 in. (Black)
https://www.amazon.com/J-V-Converting-FLOCK-1-BLK2833-Flocking/dp/B01B5FNRA8?ref_=ast_sto_dp&th=1