1 / 3
tube caps (oil can, silicone tube (310ml cartridge), ... — zdjęcie 1
1 / 3

tube caps (oil can, silicone tube (310ml cartridge), ...

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Closing cap for tubes where you cut away the tipp to open it.

Ocena
5 / 5
Polubienia
392
Pobrania
842
Wydruki
8
Wyświetlenia
2832
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

OpenSCAD model to simply create a cap with a few measurements.

2025-12-24 update:

I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle.

Of course you can buy replacement nozzles for the 310ml cartridges, but often you need only one.

About the thread in the cap and the nozzle:

I've cutted a used nozzle in half and use a permanent marker to highlight the cut. Now the shape of the thread is better visible. I've created a photo, traced the shape with 16 points and recreated them in OpenSCAD (with 32 points).

Measurements: ID=13.5mm, OD=15mm, Pitch=2.5mm

Tagi