tube caps (oil can, silicone tube (310ml cartridge), ...
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Closing cap for tubes where you cut away the tipp to open it.
- Rating
- 5 / 5
- Likes
- 392
- Downloads
- 842
- Makes
- 8
- Views
- 2,832
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
OpenSCAD model to simply create a cap with a few measurements.
2025-12-24 update:
I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle.
Of course you can buy replacement nozzles for the 310ml cartridges, but often you need only one.
About the thread in the cap and the nozzle:
I've cutted a used nozzle in half and use a permanent marker to highlight the cut. Now the shape of the thread is better visible. I've created a photo, traced the shape with 16 points and recreated them in OpenSCAD (with 32 points).
Measurements: ID=13.5mm, OD=15mm, Pitch=2.5mm
