Fujifilm X-E2 Compact Arca Tripod Plate [UPDATED]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NEW VERSION - This is a very compact arca-type tripod plate designed to fit the Fujifilm X-E2.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very compact arca-type tripod plate and bottom right strap connector designed to fit the Fujifilm X-E2. It probably will fit on the X-E2s and X-E1 as well (maybe x-e3? not sure), but I haven't tested on those - If you're able to print a copy and give it a try, please leave a comment!
New in this version: Better shape to brace better against the camera body and be more comfortable to hold. Friction tape is no longer necessary on this version, since it braces more securely against both sides of the camera.
I've tested it with these screws: https://www.mcmaster.com/92220A181/
and there is an image attached with the specifications, since that's about as big as it can fit in terms of head width and height.
Just get a 1/4 20 screw that is about 1/4" long, with a head no wider than 0.375".
⚠ Disclaimer! Use at your own risk!
I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.
I have not tested this design with lenses heavier than the XF 16-80 f/4 - though with very heavy lenses you should probably not carry it by the body anyway.