Liczymy pasujące modele…
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
A 3D-printable belt clip for holding a camera with an ArcaSwiss-style 38mm camera shoe. When inserted, the shoe is retained by the central clip. Two 3x14mm slots are provided for a camera neck strap.
I wanted to place my Buddy3d Cam on a regular boll head from a regular tripod. So I created on wich fits exactly on the bottom of the Buddy3d camera. The provided bionette Adapter can be screwed on the adapter with zwo M3x6 screws, so…
There are two versions of the plate: A fancy one and a simple one. The main advantage of the fancy plate is that it is fancy. Its disadvantage is that the timing of the screw needs to be perfect - which I cannot guarantee works for you! I…
Arcaswiss-Aufnahme für Rollei Batteriegriff für LUX-Serie Gedruckt mit PETG 0,2mm
ArcaSwiss Platte breit und schmal mit Blitzschuhaufsatz PETG 0,2mm
I made a quick remix of the stand to mount it on a arca swiss tripod head. Printed with PLA, 0.2mm layer height
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
ArcaSwiss Foot for Vega Camera also with heat set insert for tripod screw
I built this since I didn't have the money to buy a normal camera cage. It uses a ¼-20"¾ and ¼-20"5/8 screws to go in¼-20"¾ and ¼-20"5/8 screws to fasten to the side and bottom of the camera. Along with 3 m3x18mm screws to mount the side…
wip noctua a20 fan mount 3/8 16 and 1/4 20 mounting holes Category: Electronics
I created this design with the idea of preventing the Arcaswiss plate from rotating on the Dovetai base, thus ensuring that the telescope's orientation is always the same each time it is mounted on the tripod using an Arcaswiss base.
Aufnehmer für ArcaSwiss kompatible Schnellwechselplatten Benötigte Teile: M8x40 M8 Nut 15mm Feder, Innendurchmesser 8,5-11mm
Printed in PETG. Used 100% infill for the clip and a 100% infill section for the screw for better rigididy. This tripod mount requires extra hardware: 2× M4×65 screws 2× M4 Inserts 1× 1/4"-20×12.7 insert (a shorter one can be used too and…
two ArcaSwiss to flash shoe adapters designed for light loads such as LED video lights Depending on your Printer they might need post processing with a file and sandpaper or even rescaleing within the slicer have fun :D
This hand grip extension is tailored for Fujifilm X-PRO 3 and is hand-made until it fits tightly on the camera. It features an ArcaSwiss compatible mount, ready to be mounted onto a camera tripod. Features Bigger Hand Grip for more…
Tripod Mount for Ledlenser P7R with a ArcaSwiss compatible platte. Very helpful for taking pictures where more light is needed, for example Macroshots from mushrooms in the woods. It is my first model, if you have ideas to improve it,…
Spacer/adapter made to replace saddle mount on BOG deathgrip tripod. 2 spacer required and a shim if your 3/8-16 bolt is too long (Needed for my 4" bolt). Printed using 3 parameters and 25% infill with PLA.
Simple adapter for using a high precision 60mm bubble level for your tripod/ball head. Recommend 3 shells & top/bottom layers. If your printer does well with bridges, print upside down. Otherwise print right side up and use supports.
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
Recomended print parameters: 4 perimeters, PETG (PC), 0,15mm layer, infill gyroid 40%.
I did not want to use the original foot and screw something on it. Because I only use Arca-Swiss compatible Tripods, I decided to build the plate into the foot. Orient the foot on the Buildplate with the nut orientation standing optimal…
