3LeggedThing to ArcaSwiss Tripod Adapter Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ArcaSwiss Monoball p0 head has a larger base than the 3LT Leo 2.0 and thus the carabiner do not fit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions of the plate: A fancy one and a simple one. The main advantage of the fancy plate is that it is fancy. Its disadvantage is that the timing of the screw needs to be perfect - which I cannot guarantee works for you!
I transferred the hole pattern of the ¼" 20TPI screws to potentially stiffen the plate with grub screws, but I do not think that is necessary. Furthermore, the timing of the screws need to match as well - thus a better idea may be to use throughholes and just put screws in there, if stiffening is required.
You need to make a longer ⅜" 16 TPI threaded rod! Total required length is 50mm. I turned down a screw, because threaded rod with UNC thread is hard to come by in Austria…
I choose a rather snug fit for the thread - you may want to change the offset of the thread in FreeCAD.
I printed it in Prusament PC Blend Natural - to try it out.