3LeggedThing to ArcaSwiss Tripod Adapter Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ArcaSwiss Monoball p0 head has a larger base than the 3LT Leo 2.0 and thus the carabiner do not fit.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions of the plate: A fancy one and a simple one. The main advantage of the fancy plate is that it is fancy. Its disadvantage is that the timing of the screw needs to be perfect - which I cannot guarantee works for you!
I transferred the hole pattern of the ¼" 20TPI screws to potentially stiffen the plate with grub screws, but I do not think that is necessary. Furthermore, the timing of the screws need to match as well - thus a better idea may be to use throughholes and just put screws in there, if stiffening is required.
You need to make a longer ⅜" 16 TPI threaded rod! Total required length is 50mm. I turned down a screw, because threaded rod with UNC thread is hard to come by in Austria…
I choose a rather snug fit for the thread - you may want to change the offset of the thread in FreeCAD.
I printed it in Prusament PC Blend Natural - to try it out.