1 / 3
Garmin HideMyBell Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is an adapter to attach a bare HideMyBell bell to the bottom of a standard garmin mount that features a male garmin connector.
You can twist the garmin mount in one direction only. The bell also only twists on in one direction so that the whole assembly doesn't move when you put pressure on the bell “trigger”.
Print with the flat bell-side down. I used PLA. The garmin connector is very hard to twist the first couple of times. Sometimes one of the little retention knobs breaks off, but it still has a very strong grip.