Liczymy pasujące modele…
Requires Tim's lockring, spring and assembly tool (included slightly scaled versions that worked better for me, using PETG) And 2 M3 bolts for a complete assembly. UPDATE: Added version 2 with more left offset, so the unit will be in the…
I installed the RowPower Connect IQ data field on my Edge 830 so that I can record my SmartRow workouts on Garmin Connect, but had no good way to mount the computer where I can see it. So I designed a simple adapter plate that holds the…
My watch was always laying on the floor, desk or hanging from the computer while charging, so I made this stand. I wanted it functional : The forerunner 955 stands on it while charging but even if the USB is stored wrapped around. Other…
Mount for garmin edge devices that clamps on to 35mm handlebars and sits in the middle over the stem. Very durable and won't rotate or break even on the roughest downhill tracks. The top clamp (blue in the photo) is designed to break in a…
I made a simple charging stand for my Epix 2 PRO 51. Using the original charging cable. It should also fit the Fenix 6/7/8 (please let me know). Added version with thread lock (nut print 0,12 mm layer height). 4mm hex.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
Printed vertically with supports using TPU. I tried PETG, but the TPU version seems to handle the vibrations better. I am currently using it with an SPC+ phone clamp, attached to a Garmin cycling computer mount. Tested it on very bumpy…
I installed the RowPower Connect IQ data field on my Edge 830 so that I can record my SmartRow workouts on Garmin Connect, but had no good way to mount the computer where I can see it. So I designed a simple adapter plate that holds the…
My partner was unhappy about the handle he bought for Wahoo for Rose Reveal bike because it was unstable and was tipping. As a result I took part for Xlite bike and modified it in Prusa Slicer to make it possible to attach to Rose Reveal…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
Printed in PETG. Maybe increase model a little bit for TPU.
This mount is for attaching your Garmin to your handles when using a chest strap. It wraps round the handles bars and is secured in place using the watches existing strap. It was modelled around around the forerunner 745, may fit others…
I don't know if someone will be appreciated, but I had a problem finding the right position for functional charging after a year of using my hours. I had no reason to update the lessons yet, so I only tested on my specific clock models. I…
3D Printed Apple Watch to Garmin Mount Connector Upgrade your riding experience with this custom 3D printed Apple Watch to Garmin mount connector , designed for riders who demand reliability and versatility. This innovative connector is…
Garmin / Wahoo Universal GPS handlebar Stem mount for newer road cycles, you might have to scale it to fit as it was design with my bicycle specifications in mind. Print with 0.2 layer height with 4 to 5 wall lines and 25% infill in ABS /…
Garmin 515 radar mount to suit the Ibera PakRak IB-RA5. made it so it is off to the side of wheel so as to not get all the mud etc , so far has worked well. i have printed in ASA 0.2mm layer and about 35% infill and super strong, would…
3D model description I was fed up with having to take my GPS out of my bag or pockets at every consultation. This clip allows you to quickly attach a Garmin Etrex GPS (models 10x, 20x and 30x, I haven't tested the others) to your belt or…
This is a snap-in mount designed to attach Garmin devices to the openGrid system. I created it to keep all my cycling gear in one place, as openGrid is my go-to system for modular organization. No supports needed, just print as oriented…
Wanted a simple mount to mount my Garmin Striker 4 fish finer to my boat. Was not able to find anything that attached directly to the Striker 4, so I design this. Works well and holds the Striker 4 very securely. You need to print either…
About This holds a magsafe-capable phone on a head unit handlebar mount (Garmin or Wahoo). A magsafe phone mount is sufficient to hold a phone on a bike while riding an indoor trainer vigorously. The phone can be charged by the magsafe…
You can use this for your Garmin Edge 520 cycling computer. You should use TPU filament when printing. I think you'll get better prints if you position the screen facing the build plate.
This is the digital version of my backpack clip for the new Garmin Inreach Mini 3. It'll hold the Garmin on any horizontal strap that is max. 2mm thick and 45mm high. 3D Print on it's side and secure the clip to the Garmin with a M3x8mm…
If your saddle bag makes it difficult to mount your Varia radar a sufficient height above your rear tire, you need this. I removed the need for supports and also included a short version. The original length left a lot of room for the…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
Hang up hour Garmin HRM, screws into wall Printed PETG, 0.4mm nozzle, supports and mouse ear brim. Supports and brim are probably not needed
This charge stand for Garmin smartwatches reuses the original (mediocre) charging cable. It allows charging of the watch while being able to access the screen. The base has cutouts for up to 18 standard car wheel balancing weights for a…
The Garmin Bike Speed Sensor is intended to clip around the hub of the front wheel of a bicycle, and the Rogue Echo air bike is a great indoor exercise bike. But trying to get the sensor around the hub of the fan wheel on Echo was a…
During the winter I cycle indoors and to pass the time I sometimes watch a movie on my tablet. Thanks to the Garmin connector from Matz Bockley, I have made a holder for a tablet that can easily be attached to your Garmin mount.
The part should fit most Garmin devices with a 26 mm band, but has only been tested on a Fenix 7x and Fortrex 801. I originally designed this part to fit a Fortrex 801 on my Fatbike for winter adventures. There were numerous iterations…
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
Seatpost mount for a Garmin Varia. Designed to fit a 34mm seatpost, but the design can be modified to fit other seat post diameters or geometry. Full parametric Fusion 360 file included. Note that this print requires heat set threaded…
I made a standard Garmin mount for my PR2400 bike lamp after the original Ravemen mount broke. I used this model from Thingiverse of a Garmin quarter turn as a base, and made some adjustments as it was a bit loose. Keep the three screws…
Garmin Fenix 8 bike mount adaptor (remixed). I have adapted this model to fit the Garmin Fenix 8. I filleted all corners to remove potential stress points. I also made a slim (aero) version that reduces the height of the adapter to the…
The Garmin DriveSmart 86 has a 22mm ball joint instead of the other model's 17mm, so this converter lets the GPS be used with the standard mounting equipment. For printing, I used: 6 Perimeters 100% infill .20 layer height I have tested…
Watch stand for Garmin D2 Air Watch. You can lead charging cable through the groove in the base plate. For easier printing, the stand is made of 3 parts. You will need 2x M3 hexagonal nuts and 2x M3x10 inbus screw. Should anyone want to…
This is a support for Garmin Varia on back of a Velomobile.
Horní čás je originální UNI systém od Garmin. Spodní část je vlastní systém uchycení na řídítka pomocí gumiček.
To complete this Fishing Rig you will need: 8x M4x6mm heat-serts 8x M4x16mm bolts 2x M3x16mm bolts 2x M3 nuts The M3 hardware is for the two power wire wraps I used button heads but pretty much anything will work. You also need the…
è un adattatore per potere usare più di un dispositivo gps sulla propria moto. Da stampare in PETG o meglio ancora in ABS
This is a transport case for the new Garmin Inreach Mini 3 Plus. note: This case is not waterproof but protects the Mini 3 device from other gear in your pack. For the screws I used 2.5mm delta PT thread forming plastic screws. They fit…
This is an upgraded version for vivoactive 4s. Assemble is simple: just glue parts together like I did:
This is a replacement base for the Garmin Striker. I couldn’t find one available online, so I designed and made my own to create an ice fishing setup using the same Striker unit I use on my boat. I mounted it to a case, allowing the…
Saw some other quarter-turn mounts that claimed to be printable, but they still required support material. This one needs no support for most printers at <=0.1mm layer height (or whichever layer height recommends 15deg overhang or less).
This is a high-performance, integrated Garmin mount specifically designed for the Syncros ST-R100-AL stem. It mounts directly under the stem faceplate for a clean, aerodynamic "pro-cockpit" look. The geometry is specifically optimized for…
Attach your Garmin Inreach Mini 3 to a bike handle bar, railing or vertical pole. Fits up to 26mm Diameter tubes. Secured to the Garmin with a M3x8mm countersunk screw. Use Zip Ties or a 6" Titan Strap.
Hi everyone! Here's my charging dock for the Garmin Forerunner 255. You just need some rigid filament (e.g. PLA or PETG) and the TPU feet are optional. The version I printed was a bit older (I updated an overhang for better printability)…
This 'base' part pairs with another design, 'Garmin (compatible) Mount' by TJDesign, permitting taping or gluing to flat surfaces. Parts were glued together with 2P10 and taped to the table with 3M VHB double-sided tape. I still have…
2 versions for original Garmin adapter – bolted from the back Adapter to mount a Garmin Varia using the original Garmin adapter on Canyon seatposts. Designed for seatposts with two threaded inserts . 34 mm spacing between the two M4…
Deutsch: Beschreibung Tiefergelegte Halterung für Varia Radar Dieser Halter dient dazu, das Varia Radar etwas tiefer an der Sattelstütze zu montieren. Dadurch kann das Radar am Rad bleiben, auch wenn das Bike in einem Montageständer…
Garmin wants the radar mounted on the bike's seat post, but the seat post rear view is completely blocked by a trunk bag. The best spot I could find to mount the radar is on the downtube of the bike rack. Based on photos I see at…
You need to cut two M3 threads into the original Ahead cap so you can secure the part using M3x6mm countersunk screws. I glued the two individual parts together with superglue and sanded the top and bottom surfaces smooth with sandpaper,…
Summary Remix from CJ300WMs great Design: https://www.thingiverse.com/thing:6399976 I scaled it up a bit, now the device fits perfectly. See: https://youtube.com/shorts/jAWCqi3mEJM?feature=share i have also uploaded a remix of the arca…
I designed this some years ago in blender, looking forward to redesign it in freecad and make it fully paramteric - sorry this old version isnt. This version also has a special nib for the kind of wristbands I use. This will be removed or…
I've designed this to mount on my KTM690/GasGas ES700, it should fit on all KTM barclamps, not sure about other dirt or adv bikes. You'll need 4 x M4 10mm bolts and 4 x M4 nuts I printed it with 4 walls in PETG I've mounted a carplay…
I quickly modified FarlesBarkle's design to be able to mount the adapter plate to the bottom side of CUBE handlebar mount. In this case it can be used to install a light upside-down, while on the top the garmin can stay in its place.…
This is a watch stand designed to hold a Garmin watch. Just add a charger to it and you can just plop your watch down when it needs to charge. You can add a symbol to the bottom of it, like what I did with mine. Make sure to make you…
This is a printable replacement to the Coros Dura Garmin mount puck. It doesn't need support. It is 100% print in place. I printed it out of PETG using 40% infill.
The device holder part has a loose fit and it's very easy to remove the InReach. Make sure you clip the device to something or it may fall out. NOTE: The base slide mount has fairly tight tolerance / clearance (with PETG), so it's a bit…
See original instructions for the Garmin mount component here: See original instructions for the Garmin mount component here: https://www.printables.com/model/156670-3d-printing-friendly-garminwahoo-quarter-turn-inte . You'll need to…
Extended to accomodate two Garmin 840s, two Varia radars, on a side adds a pocket for MagicShine Hori 1300 light and in between the two Garmin pockets space for additional accessories. Adding also FreeCAD drawing. Printed using PLA, 0.4…
# Garmin Instinct Ergonomic Watch Band Adapter (FreeCAD Optimized) Finding a decent strap adapter for the Garmin Instinct on the internet was frustrating. Most existing models suffer from two main issues: inaccurate dimensions or a "boxy"…
Same as original. Print settings: 15% cubic infill, 0.12 mm layer height, 0.4 nozzle, 5 walls.
Mount for Garmin fishfinder transducer. I realize this mount with PETG 100% infill
This is an adapter plate for the Garmin Veria Vue front camera. This covers the mounting hardware that's where the GoPro mount attaches to. I don't use the GoPro style mount takes too long to unscrew and move from bike to bike. I designed…
Put a computer directly on the stem and fix it with just an o-ring.
Ortlieb bags are great for a numerous reasons but one thing they lack is any type of mounting hardware for accessories. I learned that magnetic mounts work well on the plastic map window as it is both very strong and very thin. I ridden…
I redesigned the Garmin Ni-MH battery charging adapter from Thorius It pushes the button between the two batteries, so the device will charge them when plugged into USB. I made it 20mm short, so if you use non chargeable Alkaline you can…
A simple replacement free loop for the Garmin Forerunner 935 or any other Garmin with a 22mm band. Made in Fusion360, it is intended to be as true to the original as possible. Printing Instructions Print on its side for best results.…
Mini 3 clip coming soon! Light weight Garmin inReach mini clip, designed from the ground up, to be as light, yet sturdy as possible. Designed to be used with the lanyard attachment, and supplied hex screw. Confirmed that this also fits…
Passant de remplacement pour bracelet de montre Garmin Largeur de bracelet : Conçu pour s'imprimer en TPU pour conserver la souplesse et la résistance Modèle avec ergot intérieur pour le blocage dans les trous du bracelet Remplacement…
A collection of Garmin ¼ turn to GoPro mounts, with variations of both male and female, 2 and 3 prong. All use an M5 bolt and nut. Available for sale on eBay: Male Garmin ¼ Turn Female Garmin ¼ Turn Printing Orientation: Male ¼ turn…
GARMIN compatible mount (both sides), can be used as a base for other designs. Step included. Category: Sport & Outdoors
If you purchased a charging station for a Garmin watch it usually comes with two pieces: a metal stand, and the actual charger for the watch separately. This part lets you use that metal stand for charging Apple watches, if you provide…
Requires Tim's lockring, spring and assembly tool (included slightly scaled versions that worked better for me, using PETG) And 2 M3 bolts for a complete assembly. UPDATE: Added version 2 with more left offset, so the unit will be in the…
A 20mm watch strap designed to be used with Garmin watches. It also has a surface pattern for more grip and is compatible with the metallic mounts from the original, so only the flexible part needs to be changed. Print with TPU! I…
LIDARLite is a discontinued product. But if you, like me, still have one lying around and you want to install it onto your model airplane or multirotor, this is for you. I installed mine in an AtomRC Penguin. But it is general enough that…
Garmin Lily 2 smartwatch Cradle including band holders, charger slot and a custom slot for the watch rim.
I built this model to attach a Garmin Varia to a Tubus bike rack using 50 mm-spaced M5 bolt holes (the standard spacing for most racks). The mount has a built-in insert that will securely mount your radar or other similarly mounted…
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
This is a replacement Garmin mount for the XLab Torpedo Versa cage in case yours is broken or deformed. I printed this in resin using my Anycubic Photon Mono 2.
A replacement for the tiny (and fragile) band fix, with a notch to hold it in place. Other versions I came across were not the Venu size, but rather the bigger Fenix size. They also had sharper edges, which left marks on the wrist. This…
Required hardware: 4x cube magnet 5x5x5mm 2x M2 screw 2x M2 threaded insert Printing Instructions Pinted on Babulab X1C 0.16mm optimal profile Printed with Bambulab PLA ash matte and matte white Feedback Appreciated Please give feedback…
The 3D printed part is a adapter for the standard Garmin handlebar mount for bike computers. Normally this standard mount is mounted to the handle bar with rubber bands (O-ring). But I found this is not a sufficient solution because the…
I made this model back in the day, and uploaded to thingyverse. To my surprise the same design is still relevant on the latest Vivoactive model. My partner has a smaller wrist and finds that two loops is a better setup. Support me!…
Charging stand for Garmin watches. Print Profile: 0.2mm layer 3 walls 15% infill
This is a replacement free loop for the Garmin Vivoactive HR. I recommend using a flexible filament such as TPU which is what I did in my case. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Filament: Doesn't Matter…
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
