Garmin mount for Ravemen PR2400 bike lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard Garmin mount for Ravemen PR2400 bike lamp
- Ocena
- 3 / 5
- Polubienia
- 6
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a standard Garmin mount for my PR2400 bike lamp after the original Ravemen mount broke.
I used this model from Thingiverse of a Garmin quarter turn as a base, and made some adjustments as it was a bit loose.
Keep the three screws from the original mount to install the new one.
Printed on a Prusa CoreOne
Material: ABS
PETG will work too and ASA would be even better. PLA will probably do the job but might not last as long as ABS or ASA ;)
4 walls – 25% infill
Supports are recommended for the two small "ears" of the mount.
STEP file included if you want to modify the mount.