Garmin Varia Seatpost Mount (Fusion 360 + 3MF File)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seatpost mount for a Garmin Varia printed at 30% gyroid infill with ASA
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Seatpost mount for a Garmin Varia. Designed to fit a 34mm seatpost, but the design can be modified to fit other seat post diameters or geometry. Full parametric Fusion 360 file included.
Note that this print requires heat set threaded inserts and corresponding screws to mount. This model also requires the original locking ring & associated screws that are included with your Garmin Varia.
I've printed this with both PETG and ASA filament. Model uses about 19 grams of filament with 30% gyroid infill (55 min print for me). Recommend ASA/ABS filament for maximum durability in outdoor conditions and UV protection. But PETG is also a good alternative. Print can be done without supports, however, I'd recommend using supports.
This is currently fitted to a Trek Domane SLR6 (2018) and it's a snug fit. Opted for a screw-based setup for the mount as I never remove this and I don't want to risk losing my expensive Varia using other fastener options (like rubber grommets).
(Note that you may need to tweak a couple of things if you change the user parameter for the seat post diameter. There is something quirky with the F360 timeline as I copied a body into a new component and that seems to have broken the full parameterization of the model ... and I couldn't be bothered to figure out a work around b/c in my mind that shouldn't be an issue.)