Garmin Varia Quarter Turn Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to attach a Garmin Varia or similar rear bike light/radar to a rack with 50mm M5 mount holes
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 283
- Wydruki
- 2
- Wyświetlenia
- 1247
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I built this model to attach a Garmin Varia to a Tubus bike rack using 50 mm-spaced M5 bolt holes (the standard spacing for most racks). The mount has a built-in insert that will securely mount your radar or other similarly mounted lights. I didn't find a mount I liked without the need for an added commercial insert, so I designed my own.
Place it on its back on the build plate and enable build plate supports. It works well in materials such as PLA or PETG, but for the longest life, I've printed mine in ePA-CF. A nut or bolt head will be held captive in the hex cutouts.
I recommend variable layer height in your slicer as it will give a better result for the locking pins. A default adaptive setting at the midpoint between speed and quality was ideal.
No commercial use please. Do like and post your makes here!