Garmin Forerunner 215 or 735XT watchband retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement strap retainer for the 215 or 735XT
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer, made new measurements, and printed this off.
Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height, costing < $0.05 in filament. The inner tab is small enough that supports weren't warranted. Harder TPU (e.g. 96A) was a bit too stiff, so stick with the softer TPU.
This should fit similar watches that have ~22.5mm internal width. 4+ years later, I printed it for my Forerunner 735XT, so it works for that watch too.
Designed in FreeCAD 0.18.