Garmin Forerunner 255 Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple station for charging your smartwatch.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everyone!
Here's my charging dock for the Garmin Forerunner 255. You just need some rigid filament (e.g. PLA or PETG) and the TPU feet are optional. The version I printed was a bit older (I updated an overhang for better printability) and I haven't made the feet yet. I use it often and it works really well.
I have also supplied a Fusion 360 file so that you can modify it if you want. Just download it and open it in Fusion.
Any normal layer height and infill density should work fine.
You also need:
a 90° connector like this
a USB-C cable.
a small screw
and some CA glue.
The STL files are already in the correct orientation.
Only stand.stl may need supports. You can glue the parts together using CA or your favorite glue.
Bol.com probably ships only to BE/NL so I hope you can find a good alternative to my 90° connector if you don't live in one of these countries.
Just search for Garmin 90° charger and you'll find plenty of products. Just don't forget to check if it's compatible with my design and modify it in Fusion if needed.
I hope you'll enjoy it and don't hesitate to share your thoughts in the comments and post a make!