Dryer spacer 70mm (230mm diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for household food dryer (230mm) for standard 70mm spools
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
“Professional” filament dryers are a little expensive so I found a household dryer (250W for <20 EUR) just a bit bigger (23cm) than spool and designed a spacer to accomodate std 70mm wide spool. You may print more than one and stack them (with or without original grid) to accomodate more spools.
It's not water-clear transparent (due to my still low knowledge of 3D printing) but for the purpose it's enough good.
Printed in transparent PET-G (for low shrink) Devil Design but any should work.
Designed in GStarCAD - if anybody want I may upload original DWG file too.
Printed on P1S but should not be a problem on any other with area 240x240.
Layer 0,24mm, nozzle 0,4mm, PET-G transparent.
(It has slots in cover and I' thinking of using to supply filament while heated - next step is to design small rotating table for the spool - will upload if/when done)
PS: I apologize for any shortcomings or errors but this is my first post on Printables