Dryer spacer 70mm (230mm diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for household food dryer (230mm) for standard 70mm spools
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
“Professional” filament dryers are a little expensive so I found a household dryer (250W for <20 EUR) just a bit bigger (23cm) than spool and designed a spacer to accomodate std 70mm wide spool. You may print more than one and stack them (with or without original grid) to accomodate more spools.
It's not water-clear transparent (due to my still low knowledge of 3D printing) but for the purpose it's enough good.
Printed in transparent PET-G (for low shrink) Devil Design but any should work.
Designed in GStarCAD - if anybody want I may upload original DWG file too.
Printed on P1S but should not be a problem on any other with area 240x240.
Layer 0,24mm, nozzle 0,4mm, PET-G transparent.
(It has slots in cover and I' thinking of using to supply filament while heated - next step is to design small rotating table for the spool - will upload if/when done)
PS: I apologize for any shortcomings or errors but this is my first post on Printables