Raspberry Pi Camera 1 to 2 View Adapter V1 - Open Data Collection Project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 1 of a 1 to 2 View Adapter for the Raspberry Pi Camera module for the Open Data Collection Project
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This Raspberry Pi Camera module case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below:
https://github.com/hleve/rpi_data_collection
This model is a part of the Raspberry Pi Camera Case and Mount V2 module. This module is just the case for the two 45-degree prisms and can be mounted to existing cameras to split the view in two.
The full case and hat mount can be found here:
https://www.printables.com/model/1056376-raspberry-pi-camera-case-and-mount-v2-open-data-co
To split the view from a single camera to gather data from the environment and facial analysis, two 10mm 45-degree prisms are used. One is placed at 45 degrees to point the camera view out at 90 degrees from the camera's orientation, and the other is placed at 60 degrees to shift the view to 120 degrees
10mm 45-degree prisms can be found on Amazon here:
https://www.amazon.com/gp/product/B0B392TBR2/ref=ox_sc_act_title_2?smid=A63I1IPQMOSQG&psc=1
Please note that although the listing shows two prisms, it only includes one, so you still need to purchase two.
The Raspberry Pi Camera model can be found here:
https://www.printables.com/model/1043855-raspberry-pi-camera