1 / 3
ZSA Moonlander Tilt Base with Magnetic Couplers Mk4 — zdjęcie 1
1 / 3

ZSA Moonlander Tilt Base with Magnetic Couplers Mk4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This unofficial base allowed me to optimize my tilted platform-based setup. It is my 4th version, hence Mk4.

Ocena
0 / 5
Polubienia
7
Pobrania
15
Wydruki
0
Wyświetlenia
632
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This setup is designed for a standing desk. But it also works well to just put it on your lap while sitting.

The base gives my writs a comfortable angle of zero degrees while the ZSA Platform is still at its maximum angle.. :-)

The spacer allows me to freely adjust the two Platform pieces. You need to buy neodym magnets with a handle to use it. I used these: https://www.amazon.de/gp/product/B0CJ4LY3DK/ (But it should be possible to adjust the spacer design to any other product that has a similar geometry. Just adjust the with of the spacer's clip.)

If you want, you can place this touchpad in the center of your spacer: Seenda MOS400

Mk4 eradicates all the shortcomings of the earlier versions. (You can find Mk1 here: https://www.printables.com/model/1023663-zsa-moonlander-tilt-base-with-magnetic-couplers-mk)

Panhead screws:
4x M4x8
4x M4x20
2x M8x25

 

Tagi