P
Printablesmark
ZSA Voyager Stand
Versions to cover common tenting slopes. The top has alignment pins and recesses for 10 mm x 3 mm magnets. Printed with 10% infill and 4 top shell layers.
- Pobrania
- 841
- Polubienia
- 31
- Ocena
- 5
Wyniki wyszukiwania: zsa
Liczymy pasujące modele…
P
Printablesbigheadcam
ZSA Voyager Tenting Bar - Works with Mag Feet
No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is designed to fit snugly over the magnetic feet that come with the Voyager, which provides a sturdier and…
- Pobrania
- 448
- Polubienia
- 10
- Ocena
- 5
P
Printablesbigheadcam
ZSA Voyager Tenting Bar V2 (Works with Mag Feet)
This is a major revision of the previous version and reduces the print time/material consumed considerably. No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is…
- Pobrania
- 290
- Polubienia
- 20
- Ocena
- 4,67
P
PrintablesPapa–o–ROM
ZSA Moonlander Trackball
New version available. The Pimoroni version is not supported anymore (firmware need to be built with v23 which is outdated). But if you prefer the small size and you are prepared to downgrade your firmware, it works perfectly well. There…
- Pobrania
- 275
- Polubienia
- 14
- Ocena
- 0
P
Printablessondresj
ZSA Voyager Dock
Update: I've made a new dock for the voyager for couch use, check it out here: https://www.printables.com/model/1261759-zsa-voyager-lapdock Updated 21.3.2024 Images show “The Dock” printed with 9% infill, PLA filament and .12mm layer…
- Pobrania
- 262
- Polubienia
- 35
- Ocena
- 5
P
PrintablesBrunoF
ZSA Voyager Tenting & Wrist Rest Kit
This is a kit I made for my keyboard ZSA Voyager ( https://www.zsa.io/voyager ) for 3 combined purposes: Add the tenting of the keyboard to 7.5 degrees Provide fixed location for wrist rest pads (model = Fellowes wrist pad for mouse, very…
- Pobrania
- 226
- Polubienia
- 22
- Ocena
- 0
P
PrintablesPeter
ZSA Voyager rigid travel case
Description This is a rigid travel case designed for the ZSA Voyager keyboard. Magnets secure the keyboard inside the case and also serve as the locking mechanism. The case’s hinge is formed from M4 screws and heat-set inserts. A key…
- Pobrania
- 226
- Polubienia
- 28
- Ocena
- 5
P
Printablesrfmarves
Additional thumb keys for ZSA Voyager keyboard
These keycaps are meant to fit the ZSA Voyager keyboard to allow for more thumb keys. The default configuration for the Voyager keyboard only has 2 thumb keys on each side. I found that too limiting, so by eliminating the number row, all…
- Pobrania
- 207
- Polubienia
- 25
- Ocena
- 5
P
Printableskraivyne
ZSA Voyager Magnetic Hard Case
Hello fellow makers, I love the ZSA Voyager. However, it has become both a blessing and a curse. I take it everywhere with me and found the cloth pouch to not be enough protection for such an expensive keyboard. I created this file that…
- Pobrania
- 195
- Polubienia
- 22
- Ocena
- 4,8
P
Printablesmark
ZSA Voyager Tripod Mount
A 3D printable mount for attaching a ZSA Voyager keyboard to a tripod. The mount has 4 guide pins for alignment and 5 magnets to hold the keyboard in place. This model is inspired by the first party tripod mount available from ZSA .…
- Pobrania
- 189
- Polubienia
- 17
- Ocena
- 0
P
Printableskageiit
ZSA Moonlander Tent Kit
Designed this tenting kit for the ZSA Moonlander with various tweaks to the original design Added a lip to better support the keyboard weight Changed the mount to better fit the Moonlander for stability Made the tolerances for the feet,…
- Pobrania
- 184
- Polubienia
- 43
- Ocena
- 4
P
Printablesrfmarves
ZSA Voyager ultimate tenting bar
Inspired by the original tenting bar published by ZSA and using the STL they published, I created an OpenSCAD model that's fully customizable. Parameters that can be adjusted: lateral tilt angle forward tilt angle magnet diameter and…
- Pobrania
- 181
- Polubienia
- 22
- Ocena
- 5
P
PrintablesShulhi Sapli
ZSA Voyager Hard Case
Hard case for ZSA Voyager. Printing Print with 0.16 layer 15% Infill Lightning Iron all top surfaces Inner/Outer/Inner Support is only needed for the cover. Print with tree support. PLA-CF is recommended as it gives a nice texture and…
- Pobrania
- 168
- Polubienia
- 27
- Ocena
- 0
P
Printablesrjorgenson
ZSA Moonlander fixed bracket
This is a quick model to allow you to attach the two halves of a ZSA Moonlander together so they don't move independently of each other on your desk. This version does not support using the tenting feature but that is planned for a future…
- Pobrania
- 167
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMG109
Rauch ZS/ZSA/ZSN fertilizer spreader shut-off guide
Spare parts for the "Rauch" fertilizer spreader models ZS, ZSA, and ZSN (others may be compatible as well)
- Pobrania
- 165
- Polubienia
- 8
- Ocena
- 0
P
Printableschasingshadows
Elevator for ZSA Moonlander (Print-in-Place)
This is a print-in-place foldable, collapsible tenting stand for the ZSA Moonlander keyboard. It has a tenting angle range of 32–45º, stays attached to the keyboard, and can easily be collapsed flat without disassembly for travel or…
- Pobrania
- 162
- Polubienia
- 34
- Ocena
- 0
P
Printablesmingthein
MING ZSA keyboard set for Voyager and Moonlander
Unifying baseplate and aluminium keycap files for Voyager; MX socket plugs for Moonlander. Keycaps designed for aluminium CNC.
- Pobrania
- 161
- Polubienia
- 13
- Ocena
- 0
P
PrintablesDanila Dergachev
ZSA Moonlander keyboard stand
I'm often switching between my moonlander and my gaming keyboard, and I wanted to free up some desk space when moonlander isn't in use. Additionally you can put a trackpad in between. For additional strength you can print it with the…
- Pobrania
- 155
- Polubienia
- 49
- Ocena
- 5
P
Printablesdarkytoothpaste
ZSA Moonlander thumb cluster telescopic leg
Update 11 Dec 21: I have redesigned a telescopic leg that allows you to have any variable height between 35 to 70mm. This allows a more comfortable tent that allows for the thumb cluster to remain up for easy reach. However, the…
- Pobrania
- 138
- Polubienia
- 9
- Ocena
- 0
P
PrintablesZSA
ZSA Voyager KLP Lamé keycaps
A remix of the KLP Lamé keycap set by braindefender made specifically for the Voyager from ZSA. These are nice, lightly-curved keycaps for your Voyager that give you a slight keywell effect and infinite color customization possibilities.…
- Pobrania
- 127
- Polubienia
- 16
- Ocena
- 5
P
Printablesbigheadcam
ZSA Voyager - Thumb Keys (Remix)
This remixes the thumb key design created by rfmarves. The main changes are a slightly larger thumb piece (I have fat thumbs) and the key cap more closely resembles the rest of the keys to make it match the design and fit in a little…
- Pobrania
- 126
- Polubienia
- 7
- Ocena
- 5
P
PrintablesKorrigan
ZSA Navigator holder with Tenting Bar (7º only for now)
What is this This is a ZSA Navigator holder with tenting bar, for the voyager keyboard, it allows you to switch your trackball between left and right side. Included is a second tenting bar without a holder, you should mirror whichever…
- Pobrania
- 97
- Polubienia
- 11
- Ocena
- 5
P
PrintablesDusBus
Hotswap Socket Cover Cherry MX Keyswitch for ZSA Moonlander MK 1
After removing a bunch of keys I didn't like how it left the hotswap sockets open and all exposed. Whipped up this quick and simple model, which I'm very pleased with. I suppose it really comes down to how well your printer is calibrated.…
- Pobrania
- 92
- Polubienia
- 16
- Ocena
- 0
P
Printablesnivekmai
ZSA Moonlander MK1 Thumb Cluster
The original model provided by ZSA is a great starting point, but isn't printable, and was quite a messy mesh (and it had tons of unnecessary/invalid triangles). I've cleaned it up to a step file that should be quite a close replica of…
- Pobrania
- 88
- Polubienia
- 10
- Ocena
- 0
P
Printablesbenkrejci
Ergonomic ZSA Moonlander Tilt Stand
I like my ZSA moonlander MK1 to tilt out and forwards (like my hands are resting on the top of a big bouncy ball) without tenting the thumb clusters. Printed this in 2 interlocking pieces so that each can fit in the build volume of a…
- Pobrania
- 85
- Polubienia
- 19
- Ocena
- 2
P
Printablesbigheadcam
ZSA Voyager - Replacement Key Cap 1u + Homing Bump Variant
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps, but it works if you just need to replace one or two…
- Pobrania
- 82
- Polubienia
- 10
- Ocena
- 5
P
PrintablesIdealParking4462
ZSA Moonlander Tripod Mount to 1/4" tripod mount
Connect your ZSA Moonlander keyboard to a standard tripod/camera mount (1/4"). Compatible with: ZSA Moonlander MK1. ZSA Halfmoon. Hardware required: Both versions 4 x M2.5 x 12mm screws per side. Heat set version 1 x ¼"-20 x 8 x 8 heat…
- Pobrania
- 79
- Polubienia
- 15
- Ocena
- 0
P
Printablesmark
ZSA Voyager Shell
This is a model of the bottom shell for a ZSA Voyager keyboard, which was developed by and originally published on the ZSA site . The model includes exact measurements, screw cutouts, and markings, it is intended to be used to design…
- Pobrania
- 79
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLoss of signal
ZSA Voyager Carry case
A simple stackable carry case for the voyager. the case can be stacked with the cover, or thanks the small magnets inside the case you can flip it on itself to save a bit of space. you need : 6x3 magnet for the feets and the layers (20 in…
- Pobrania
- 76
- Polubienia
- 8
- Ocena
- 5
P
PrintablesHaggiwatt
- Pobrania
- 72
- Polubienia
- 8
- Ocena
- 0
P
Printablessondresj
ZSA Voyager Lapdock
For when you don't have a table, or if your a couch potato like me Printed with .2mm layerheight, no supports. OpenSCAD model available here if you need to adapt it to your preferences. To print the right half, just mirror the parts in…
- Pobrania
- 62
- Polubienia
- 9
- Ocena
- 0
P
Printablesr00k
Ergonomic Moonlander (ZSA) Keyboard tent
Ergonomic desktop tent for the ZSA Moonlander Mk 1 keyboard. I created a few different angles to play around with comfort, resulting in (from vertical) a 45, 30, and 15 degree tent. All 3 models are available, however I found I prefer the…
- Pobrania
- 61
- Polubienia
- 14
- Ocena
- 0
P
PrintablesDominik Domoń
Nursery pot - doniczka rozsadowa
Doniczki rozsadowe 3x3x4 cm z podstawką na 20 szt. doniczek.
- Pobrania
- 61
- Polubienia
- 7
- Ocena
- 0
P
PrintablesZSA
ZSA Navigator Moonlander Shells
A collection of ZSA Navigator shells to use with your Moonlander! First, choose whether you want the thumb shell or the side shell, and what side you want it to be on. Get that STL, then grab the opposite-side wedge STL to make sure both…
- Pobrania
- 59
- Polubienia
- 17
- Ocena
- 0
P
Printablesjheezy
Mr. Baddeley MK4 BuzzSaw
These are files to adapt Tim's Mk3 BuzzSaw to the Mk4 Complex body. The main piece needed is the Mk4 body mount. With it you can use all of Tim's original files to complete the buzzsaw. On my Mk3 I extended the buzzsaw arm a bit, and it…
- Pobrania
- 57
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKorrigan
Original ZSA Navigator holder
What is this This is a ZSA Navigator holder, for the voyager keyboard, it allows you to switch your trackball between left and right side. I have also included a (right side) shim if you use your voyager flat on your desk, it will…
- Pobrania
- 56
- Polubienia
- 7
- Ocena
- 0
P
Printablesmark
ZSA Voyager Tenting Bar
Tenting bar for the ZSA Voyager keyboard, which was developed by ZSA and originally published on the ZSA site . The bar creates a 5º angle, includes alignment pins, and has a 10mm x 4mm recess for magnets.
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesShulhi Sapli
ZSA Voyager Travel Tenting Kit
Assembly You need 8 magnets Outter Diameter: 10mm Inner Diameter: 3mm (with chamfer) Length: 3mm 4 tenting legs (see image) https://www.amazon.com/dp/B0BY8J4L7X
- Pobrania
- 50
- Polubienia
- 13
- Ocena
- 4
P
PrintablesaRGiRob
kanizsa triangle
kanizsa triangle I suggest setting the slicer to print the white triangle with an infill equal to 12.5% not to waste filament. You can find all my models here , thank you who will appreciate with a download or with a like
- Pobrania
- 48
- Polubienia
- 14
- Ocena
- 0
P
PrintablesRob the 3D Printing Dad
ZSA Navigator Brakets for Thumb Trackball Setup
These brackets let you customize how the Navigator trackball integrates with your Voyager keyboard . They reuse the magnet, screws, and back-plate from the original Navigator mount or buy 60x13.5x5mm magnets for example from Amazon and…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 5
P
Printablesonorinbejasus
ZSA Moonlander Tent Kit - Smaller Stand
A smaller stand (~25mm) for the tenting system. I used this tenting system in conjunction with this thumb leg while waiting for my replacement casing to arrive from ZSA
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZSA
ZSA Navigator Thumb Shell (Voyager)
Move your Navigator trackball to your thumb! Please see our blog post for detailed instructions and videos on repurposing the magnets of the Navigator and the Voyager tenting legs for this project. This project includes a number of files…
- Pobrania
- 44
- Polubienia
- 14
- Ocena
- 4
P
PrintablesJackson
ZSA Moonlander Tenting Stop Replacement
The .3mf file has both the right and the left. but Fusion only has the left. The right is just a mirrored version of the left. The center hole for the bolt to go through is pretty tight. My Mini can print it fine but if you might need…
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 4
P
Printablesnov1n
Ploopy Nano mount for ZSA Moonlander keyboard
I do not own a Ploopy Nano myself so I was unable to test this. One person has successfully printed this model and it seems to work. See comments for more details. Print at your own risk.
- Pobrania
- 42
- Polubienia
- 20
- Ocena
- 5
P
Printablesdarkytoothpaste
ZSA Moonlander extended leg (76mm)
This is an extended leg for the moonlander that allows you to tent the keyboard higher than stock. The leg has been ergonomically designed to allow you to stow the leg into the storage position for transportation. You can also achieve…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
Printablesgabevan
ZSA Voyager Keyboard 15 Degree Tenting Stand
This is a stand for the ZSA Voyager keyboard to tent it 15 degrees out. There is also an additional model you can use as a direct print of a TPU foot or as a stencil to cut a foot out of foam to glue to the bottom.
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNightfox
Wappen ZSan Dienst
Wappen des Zentralen Sanitätsdiensts
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
Printablestdwalton
Tripod Mount for ZSA Voyager Keyboard
The black mount featured in the cover photo is the newer slim model using heat-set inserts. For the other red model I used embedded 7/16 nuts with ¼ x 20 thread, for the tripod connection, instead of heat-set inserts, in case you don't…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesShane Deiley
Ploopy Nano BTU Mod with ZSA Moonlander Right Thumb Cluster Attachment
I am a very novice CAD user, so the STL has a lot of flaws - not smooth edges, lacking symmetry, etc. I really wanted to mount a trackball to my ZSA Moonlander, particularly for my right thumb. I took a BTU mod of the top part of the…
- Pobrania
- 33
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBananaJoe
zsa voyager palm wrist rest pad
Made a minimal palm rest for the zsa voyager. Includes a riser to match the angle when tenting is used. Requires some sandpapering etc. The connection between riser and the pad is not the best but it works and i am too lazy to make it…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRob the 3D Printing Dad
ZSA Voyager Butterfly Case
I printed this compact and filament-efficient case using PETG , ensuring durability while keeping material usage to a minimum. The design is small, lightweight, and optimized for easy printing without sacrificing strength. The hinge is…
- Pobrania
- 31
- Polubienia
- 11
- Ocena
- 0
P
Printablesbigheadcam
ZSA Voyager - Replacement Key Cap 2u + Homing Bump Variant
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it…
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 5
P
Printablespatarmstrong
ZSA Voyager Keyboard Case
A hardcase for the ZSA Voyager Keyboard in its soft case. -my print settings- -Printer Prusa Mk3+ -.15 quality -PETG
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesConrad Parker
zsa voyager tripod mount using feet
Hey I figured I would share this so you don't have to pay for the mounts (and wait for them to ship) from zsa. You will need 2 1/4-20 x 12.7mm (Camera/Tripod) - for 8mm holes Optionally, you can add in 3mm x 5mm magnets too. The magnetic…
- Pobrania
- 29
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAJahraus
ZSA Moonlander Anlged Fixed Bracket
Similar to the original Moonlander fixed bracket, this model to allow you to attach the two halves of a ZSA Moonlander together so they don't move independently of each other on your desk. I added a 30 degree bend in the model so that the…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBLangdon
ZSA Moonlander Platform Position Clip
Was in need of a replacement part to get the Moonlander Platform working again. The original par cracked at some point and the keyboard would no longer be able to stay at angle. Exported as a two part model, includes mirrored for Left and…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGateway3
ZSA Voyager Extreme Tent
Screw the magnets into the mount, attach the stand to the mount, attach the rubber feet to the stand legs, then it should snap onto your ZSA keyboard.
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
Printablestrustyourforce
Buzzsaw shark Flexi toy
No supports needed This is for private use only. You cannot sell any prints. A commercial license can be purchased here https://cults3d.com/en/3d-model/game/buzzsaw-shark-commercial-license Updated 7/13/25: A new version with stronger…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRob the 3D Printing Dad
ZSA Voyager Keyboard Tenting Kit Legs
These tenting adapters are designed for easy installation on the ZSA Voyager keyboard halves. The adapters are printed in TPU for flexibility, while the feet are printed in TPE for a secure grip. No supports required for printing. You…
- Pobrania
- 23
- Polubienia
- 8
- Ocena
- 0
P
Printablestriantium
ZSA Moonlander mount for Navigator
A quickly printed holder to hold the ZSA Navigator onto a Moonlander Keyboard. Fits besides the kgeys or onto the thumb cluster. Check Orientation before printing, for left handed use you can simply mirror it. Print with the cable opening…
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
PrintablesStephen McAteer
Cornager thumb keycaps (ZSA Voyager)
Thumb keycaps for the ZSA Voyager for use with layouts that use row 2 as the home row which frees up extra thumb keys. For example, this layout . If you want any source files &c., happy to share, just sing out. (Just promise not to judge…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBent Derailleur
ZSA Voyager/Navigator Link
Link your split keyboard and trackball together with this model. Angle of keyboard halves: 15 degree. Tent angle: 6 degree (slightly more than with original studs). Trackball position as low as possible, on desk. Keeb halves sits quite…
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
PrintablesZSA
ZSA Navigator Trackpad Taller Shell
It's the default Navigator shell, but a little taller. By default, the Navigator trackpad sits around 8mm below the the keycaps of the Voyager. This works well, similar to any other trackpad, but through the magic of 3D-printing, you can…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesZSA
ZSA Navigator Trackball Crown
The Navigator Trackball is ultra-smooth, up there with the best trackballs, when using your board flat or at a slight angle. This print lets you continue using the Trackball even at higher tenting angles. You won't need any supports or…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
Printablesrandom.ae
Zsa Zsa's Double-Sided Pup Tag
Edit the “text” fields in the Openscad .scad file with your pet's name and contact info. Change the “print” variable to the model that's been edited and re-render and re-save as stl. You may have to adjust the font sizes and alignment to…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNitoki
Kirby con la fuerzsa de All Might
Kirby casero con un brazo activando el quirk de Deku
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
Printablesengitheatre
ZSA Moonlander Hard Case
The flat pieces are the bottoms so you can just lift boxes, plug in the halves, and go. Also works with the flat pieces as the tops though. Cases are held together with 5mm diameter 2mm thick magnets, which are strong enough to hold them…
- Pobrania
- 17
- Polubienia
- 9
- Ocena
- 0
P
Printablesbauersimon
ZSA Voyager Case
Super small model for the two halves and some accessories. 3 parts: bottom, middle, top! Contains holes for magnets (6x3mm) to snap the parts together and keep the halves inside the chambers (5x1mm). The holes in the back is to lift the…
- Pobrania
- 16
- Polubienia
- 5
- Ocena
- 0
P
Printablesknackwurst
ZSA Moonlander Wrist Rest Riser
This wrist rest riser for the ZSA Moonlander MK1 is designed to raise the original wrist rests slightly, improving ergonomics, wrist angle, and overall typing comfort. The model follows the underside geometry of the Moonlander wrist…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAlex Don
ZSA Voyager Travel Tenting Kit (6x2mm ver)
I liked what Shulhi Sapli made but didn't have the magnets required for this. I already had 6x2mm magnets laying around so I ordered the holders required from aliexpress, and updated the 3d file to use 6x2mm magnets. Honesly works pretty…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printablesmagikid
ZSA Moonlander Tripod Mount to 1/4" tripod mount with stabilization pin holes
This lets you mount your ZSA Moonlander on tripods or arms that have the stabilization pins. I'm specifically mounting mine on the SmallRig Rosette 11" Magic Arms: https://a.co/d/08LQxkpj I printed them with: 0.2mm layer height 4 wall…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printablesosi_layer_eight
ZSA Moonlander Tilt Base with Magnetic Couplers Mk4
This setup is designed for a standing desk. But it also works well to just put it on your lap while sitting. The base gives my writs a comfortable angle of zero degrees while the ZSA Platform is still at its maximum angle.. :-) The spacer…
- Pobrania
- 14
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJackson
ZSA Moonlander Navigator Mount
I use the tenting kit with my moonlander so the out of the box ZSA provides doesn't really work for my setup. According to my phone my keyboard is at about 28° and i have my trackball on the right keyboard. But you should just be able to…
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
Printablestriantium
ZSA Moonlander foot stabilizer
Short Foots for the ZSA Moonlander in case you thunbparts are too woobly to your liking
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPapa–o–ROM
ZSA Moonlander x Navigator Trackball
This mod allow a perfect integration of ZSA Navigator in right thumb cluster of your Moonlander. Why to choose this mod No cables tangling around (we use the flat ribbon cable included in your Moonlander) No firmware modding needed. Just…
- Pobrania
- 13
- Polubienia
- 7
- Ocena
- 0
P
PrintablesYourRobotOverlord
ZSA Moonlander Mk. 1 Modular Mounting System Adapter
Update 260315: Added version with anti-slip tabs to better resist unwanted tilting when in use. Compatible with Anti-Slip MMS Beams . This adapter allows you to mount your Moonlander Mk. 1 keyboard to virtually anything using Modular…
- Pobrania
- 11
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKonrad Stang
zsa voyager keyboard spacer
Spaces out keyboard by 90mm measured at board base between top row. uses 6 cylindrical magnets 6mm x 3mm, 4 would probably be sufficient if you want to leave 1 middle one out on each side. the top pegs on each corner fit into the existing…
- Pobrania
- 11
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBent Derailleur
ZSA Voyager Navigator Bridge
Bridge for the ZSA Voyager keyboard with Navigator trackball or trackpad. Keep the halves together with some angle and tent (25 degree angle and 7 degree tent). Use preferably with two short TRRS cables, either straight or angled. Length…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesnarmod
Custom shine through keycaps for ZSA Voyager
Disclaimer: This is not an easy print. Make sure you test print one or two before you print a whole batch. These keycaps were made for printing with fuzzy skin point distance 0.2 and fuzzy skin thickness 0.24. Apply fuzzy skin on only the…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZSA
ZSA Navigator Simple Square Shell
A simple, non-board-specific shell for the ZSA Navigator . No special instructions needed — just print and go. This does not mount to anything, so it's intended to use on your desk between the two keyboard halves if you want a more…
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
Printablesosi_layer_eight
ZSA Moonlander Tilt Base with Magnetic Couplers Mk1
This setup is designed for a standing desk. But it also works well to just put it on your lap while sitting. The base gives my writs a comfortable angle of zero degrees while the ZSA Platform is still at its maximum angle.. :-) The…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesbrimstone326
Buzzsaw Trap - Miniature Terrain
I hadn't really planned on making this, but there's a lack of free files in this area. I may post more, but I'm still working on other projects. EDIT: 7/7/17 - The parts I printed came out ok, but I did make a version 2 that takes into…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGiorgioFoX
ZSA Planck keyboard rear cover
I bought a ZSA Planck EZ from a friend who wasn’t using it anymore. The reason? The original case was broken, and the keyboard had been sitting unused for quite some time. Instead of letting it go to waste, I decided to completely…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSoerli
ZSA Voyager Tenting Bar - Reverse Engineered
Tenting bar for the ZSA Voyager keyboard, which was developed by ZSA and originally published on the ZSA site . I reverse engineered the geometry to create a parameterized model in onshape . This free document enables everyone to adjust…
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
Printablesjoeworks
ZSA Voyager Navigator Trackball Trap
I have an issue with the ZSA Voyager Navigator Trackball. It is useless with 45 deg. tenting and the trackball frequently dropped when I moved or packed the keyboard. I designed this Trap as my solution to those problems, making the ZSA…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesbrimstone326
Rescue Heroes - Buzzsaw Hand Attachment
I had this idea the other day and had to try it out. I got lucky and it worked on the first try! The blade and saw attachment fit together and the blade can be freely spun. My kids love it! I printed this at 80% infill and 0.2 layers. It…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printables
ZSA Voyager - Replacement Key Cap 2u + Homing Bump Variant
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it…
P
Printables
ZSA Navigator Thumb Shell (Voyager)
Move your Navigator trackball to your thumb! Please see our blog post for detailed instructions and videos on repurposing the magnets of the Navigator and the Voyager tenting legs for this project. This project includes a number of files…
P
Printables
Cornager thumb keycaps (ZSA Voyager)
Thumb keycaps for the ZSA Voyager for use with layouts that use row 2 as the home row which frees up extra thumb keys. For example, this layout . If you want any source files &c., happy to share, just sing out. (Just promise not to judge…
P
Printables
ZSA Moonlander Tripod Mount to 1/4" tripod mount with stabilization pin holes
This lets you mount your ZSA Moonlander on tripods or arms that have the stabilization pins. I'm specifically mounting mine on the SmallRig Rosette 11" Magic Arms: https://a.co/d/08LQxkpj I printed them with: 0.2mm layer height 4 wall…
P
Printables
zsa voyager keyboard spacer
Spaces out keyboard by 90mm measured at board base between top row. uses 6 cylindrical magnets 6mm x 3mm, 4 would probably be sufficient if you want to leave 1 middle one out on each side. the top pegs on each corner fit into the existing…
P
Printables
ZSA Voyager/Navigator Link
Link your split keyboard and trackball together with this model. Angle of keyboard halves: 15 degree. Tent angle: 6 degree (slightly more than with original studs). Trackball position as low as possible, on desk. Keeb halves sits quite…
P
Printables
Buzzsaw Trap - Miniature Terrain
I hadn't really planned on making this, but there's a lack of free files in this area. I may post more, but I'm still working on other projects. EDIT: 7/7/17 - The parts I printed came out ok, but I did make a version 2 that takes into…
P
Printables
ZSA Voyager Tripod Mounts
Additional Parts (per side): 5x 10x2 mm magnets 1x ¼" threaded heat set insert
P
Printables
ZSA Navigator Moonlander Shells
A collection of ZSA Navigator shells to use with your Moonlander! First, choose whether you want the thumb shell or the side shell, and what side you want it to be on. Get that STL, then grab the opposite-side wedge STL to make sure both…