ZSA Voyager Magnetic Hard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2 level with lid hard case for the ZSA Voyager keyboard that uses magnets as the closure mechanism.
- Ocena
- 4,8 / 5
- Polubienia
- 22
- Pobrania
- 195
- Wydruki
- 5
- Wyświetlenia
- 1644
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello fellow makers,
I love the ZSA Voyager. However, it has become both a blessing and a curse. I take it everywhere with me and found the cloth pouch to not be enough protection for such an expensive keyboard. I created this file that has 2 levels and a lid.
The bottom level holds the left hand side and the magnetic feet risers, the second holds the right hand side and has some additional space for any other parts, and lastly we have the lid.
This is honestly quite an easy print, but can take some time. The 2 bottom parts took about 3 hours on my Bambu P1S and the top takes about 2 hours.
The holes are made to fit 6x3 mm N52 magnets but I made the holes slightly bigger to compensate for my printer.
Print Settings:
15 % Gyroid Infill
2 walls
No Supports
After Print Assembly:
Make sure you orientate the magnets correctly before gluing them in! I made the mistake of not checking the polarity with my first print and messed up the whole thing…